Library

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Guide discussing the siting of residential and community safe rooms at appropriate elevations and locations.

ICC 500 provides the minimum requirements to safeguard public health, safety, and general welfare relative to the design, construction, and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Checklist providing prescriptive instructions on how to retrofit ladder framing on gable end overhangs to achieve a maximum depth of 18 in. from the face of the wall.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Website describing wet floodproofing measures to prevent against structural damage, internal damage and damage to electrical components.

Document describing living shoreline techniques for shoreline stabilization.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report on on lessons learned from building one multifamily home to the Zero Energy Ready Home program requirements.

An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Document describing precast concrete earthquake design considerations including connections, detailing, and forces, among others.

Newsletter containing five articles focused on seismic retrofitting.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.