Library

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Code describing energy codes for energy-conserving and compliant designs in Florida.

The purpose of this standard is to establish minimum requirements to safeguard the public health, safety and general welfare relative to the design, construction and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

2018 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Code set from IAPMO explaining plumbing standards. 2018 publication.

2019 version of the California Residential Code.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

2020 energy efficiency code for the state of Florida.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

A presentation on the 2020 State Mechanical Code for easier understanding.

Document containing a series of resource papers that describe earthquake design components, including shear walls, resiliency, ground motion, and story drift and deflection, among others.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2023 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Document describing advancement in factory built housing innovations.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Paper discussing innovative strategies for improving ventilation systems in high-rise apartment buildings, focusing on compartmentalization and controlling stack effect pressures to enhance indoor air quality and energy efficiency published in the Proceedings of the Eighth Conference on Building...

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Energy Star web page providing guidance on attic ventilation.

Standard outlining industry procedure for sizing residential duct systems.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

The research report outlines a practical and cost-effective strategy utilizing central HVAC systems to optimize humidity control and ventilation in energy-efficient homes located in hot-humid climates, demonstrating significant improvements without requiring complex equipment upgrades.

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Report describing a field investigation of failure rates of whole-house mechanical ventilation systems installed in Florida homes.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Technical report describing the evaluation of air management systems in a high-rise apartment building in Toronto, Ontario, focusing on air leakage, suite depressurization, and the performance of in-suite exhaust and corridor ventilation systems.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Articles describing attic and ceiling insulation, including mentions of baffles with protect insulation from wind washing.

Web page describing the benefits of attic fans, with rules for sizing fans and intake vents.

Blog article discussing pros and cons of attic ventilation fans.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Technical article describing issues and moisture concerns related to weatherization efforts.

YouTube channel featuring 90+ videos to educate Bay Area homeowners and contractors about seismic retrofitting, including information for various home and construction types.

Article describing how demand plumbing systems send cold water back to the water heater until hot water arrives at the sink, shower or other fixture where it is needed.

Article describing the common ventilation system types, issues, and solutions in New York City's multifamily residential buildings to improve indoor air quality, occupant health, and building durability.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Presentation about advanced framing techniques.

A comprehensive list of professional certifications offered by the Building Performance Institute. The webpage includes links to overviews of the different certificates, certification scheme handbooks, and directions for taking certification exams and recertification.

Website providing CAD files and drawings of advanced framing details.

Training manual on how to locate ducts within conditioned space and compact design.

ENRGY STAR webpage discussing the basics of certified ceiling fans.

Information sheet with information about insulating and ventilating attics.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Document containing a 3D drawing (CAD) of advanced framing details.

Webpage with instructions for heat pump installers to choose the most suitable type of heat pump system, according to a project’s specific requirements.