Library

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Code describing energy codes for energy-conserving and compliant designs in Florida.

The purpose of this standard is to establish minimum requirements to safeguard the public health, safety and general welfare relative to the design, construction and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

2015 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

Guide providing engineering seismic design and building practices based on post-earthquake research.

A colored map showing seismic zones across the United States, ranging from lowest to highest seismic hazards.

Code set from IAPMO explaining plumbing standards. 2018 publication.

2019 version of the California Residential Code.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

2020 energy efficiency code for the state of Florida.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Document presenting the minimum recommended requirements necessary for the design and construction of new buildings and other structures to resist earthquake ground motions throughout the United States.

Document containing a series of resource papers that describe earthquake design components, including shear walls, resiliency, ground motion, and story drift and deflection, among others.

Document describing advancement in factory built housing innovations.

A brochure educating homeowners on how to protect their home during seismic events.

Standard outlining industry procedure for sizing residential duct systems.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

The research report outlines a practical and cost-effective strategy utilizing central HVAC systems to optimize humidity control and ventilation in energy-efficient homes located in hot-humid climates, demonstrating significant improvements without requiring complex equipment upgrades.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Report providing information regarding the benefits and challenges associated with the installation of earthquake-actuated automatic shut-off valves (ASVs) or remote-control valves (RCVs) to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Safety brochure from the Consumer Product Safety Commission (CPSC) describing the dangers to children of furniture tipping over if it is not securely anchored.

Website providing consumers with information about the risk to children from appliances and furniture tipping over and ways to anchor furniture and appliances to prevent this hazard.

Web-based mapping tool offering a fast, reliable way to look up key design parameters specified in Standard ASCE 7-10, 7-16, or 7-22 for a specific address or location which is free to use and can look up data for eight different environmental hazard types: wind, tornado, seismic, ice, rain, flood...

A basic guide walking through the various types of valves useful in mitigating the effects of earthquakes and other seismic events on natural gas pipelines for residential use.

YouTube channel featuring 90+ videos to educate Bay Area homeowners and contractors about seismic retrofitting, including information for various home and construction types.

Article describing how demand plumbing systems send cold water back to the water heater until hot water arrives at the sink, shower or other fixture where it is needed.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Presentation about advanced framing techniques.

A comprehensive list of professional certifications offered by the Building Performance Institute. The webpage includes links to overviews of the different certificates, certification scheme handbooks, and directions for taking certification exams and recertification.

Website providing CAD files and drawings of advanced framing details.

Training manual on how to locate ducts within conditioned space and compact design.

California State Code of Regulations, Title 16, Division 8, Article 3, listing requirements for plumbing contractors.

Catalog describing FEMA earthquake-resistant construction resources.

Website providing disaster preparedness information and resources for residents and building owners in locations susceptible to earthquakes.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Document containing a 3D drawing (CAD) of advanced framing details.

Webpage with instructions for heat pump installers to choose the most suitable type of heat pump system, according to a project’s specific requirements.

Document for contractors detailing how to prioritize, control, and configure heat pumps in a residence that uses two heating systems.

Document for customers describing the benefits of two-system controls for homes, including information answering how, when, why, and how two-system controls with multiple heating sources are employed.

Webpage from FireSafe Marin explaining the different landscaping strategies near homes to lower the risk of a home's ignition from wildfire.

Standard describing prediction, mitigation, and reduction of moisture damage to the building envelope, materials, components, systems, and furnishings, depending on climate, construction type, and HVAC system operation; the webstore allows preview or full purchase.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Guide describing design recommendations to ensure that electric vehicle charging stations comply with the Americans with Disabilities Act

Report explaining the principles of seismic design to architects.

Wildfire resistant home checklist from Murray Milne, a professor of architecture at UCLA, who outlines seven steps to take to improve a home's chance of survival during a wildfire.