Library

Manual assisting architects, engineers, owners and roofing contractors for designing, specifying and installing roof tiles in areas of snow and ice.

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Webpage with instructions for heat pump installers to choose the most suitable type of heat pump system, according to a project’s specific requirements.

Document for contractors detailing how to prioritize, control, and configure heat pumps in a residence that uses two heating systems.

Document for customers describing the benefits of two-system controls for homes, including information answering how, when, why, and how two-system controls with multiple heating sources are employed.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Website providing building science based guidance and training for residential construction.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Research report anayzing the results of a large retrofit project, turining an old school into near zero energy consumption apartments in Greenfield MA.

Information sheet about crawlspace insulation, including installation details.

Webpage from FireSafe Marin explaining the different landscaping strategies near homes to lower the risk of a home's ignition from wildfire.

Standard describing prediction, mitigation, and reduction of moisture damage to the building envelope, materials, components, systems, and furnishings, depending on climate, construction type, and HVAC system operation; the webstore allows preview or full purchase.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Guide describing design recommendations to ensure that electric vehicle charging stations comply with the Americans with Disabilities Act

Wildfire resistant home checklist from Murray Milne, a professor of architecture at UCLA, who outlines seven steps to take to improve a home's chance of survival during a wildfire.

A guide on the use of rain barrels for greater water efficiency and use in gardens and lawns.

A research paper exploring the installation and mounting of solar photovoltaic (PV) panels on rooftops and the challenges faced by system designers and installers.

Website for the U.S. DOE Solar Decathlon competition.

Information about dense pack, cellulose insulation.

FEMA guide containing recommendations on how to implement cost-effective measures that can help to reduce the potential hazards associated with earthquakes.

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

ENERGY STAR factsheet describing the HVAC Quality Installation Program

Section 608 establishes EPA’s National Recycling and Emission Reduction Program designed to reduce emissions related to maintaining, servicing, repairing, and disposing of air conditioning or refrigeration equipment.

Study investigating homeowner measure package choices in the Illinois Home Performance with ENERGY STAR program compared to cost-optimal choices determined through Building Energy Optimization (BEopt) modeling software.

Case study on exhaust ventilation and corresponding outdoor air intake strategies implemented in high-performance new-construction multifamily buildings.

Report about an experimental evaluation conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Fact sheet discussing safe room and storm shelter door assemblies along with ICC® 500 compliance.

Article explaining what a continuous load path is and the key connection points that make it up.

Guide discussing the siting of residential and community safe rooms at appropriate elevations and locations.

Fact sheet discussing designs for prefabricated safe rooms built to ICC 500 standards mentioned in FEMA P-361.

ICC 500 provides the minimum requirements to safeguard public health, safety, and general welfare relative to the design, construction, and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Webpage describing the purpose of safe rooms and criteria necessary to meet FEMA P-361 and P-320 criteria.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Guidelines from the University of California Cooperative Extension on how fires spread, how homes typically burn, and what homeowners can do to prepare their homes for wildfire season.

Articles, research, case studies, and more outlining considerations for planning and installation of a fire-protection system.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Brochure-guide describing swales and their qualities, including objective, maintenance, and design considerations.

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Checklist providing prescriptive instructions on how to retrofit ladder framing on gable end overhangs to achieve a maximum depth of 18 in. from the face of the wall.