Library

Webpage describing the purpose of safe rooms and criteria necessary to meet FEMA P-361 and P-320 criteria.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Guidelines from the University of California Cooperative Extension on how fires spread, how homes typically burn, and what homeowners can do to prepare their homes for wildfire season.

Articles, research, case studies, and more outlining considerations for planning and installation of a fire-protection system.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Brochure-guide describing swales and their qualities, including objective, maintenance, and design considerations.

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Checklist providing prescriptive instructions on how to retrofit ladder framing on gable end overhangs to achieve a maximum depth of 18 in. from the face of the wall.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.

Website providing resources for roofers to construct high-wind, hurricane, and hail-resistant roofs from IBHS Fortified program.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

Article describing a numerical model that can be used to size foundation heat exchanger (FHX) systems.

Website describing wet floodproofing measures to prevent against structural damage, internal damage and damage to electrical components.

Commercial website providing images to subscribers.

Document describing living shoreline techniques for shoreline stabilization.

Report identifying Building America and 2021 International Energy Conservation Code climate zone designations for every county in the United States; where a county's climate zone designation has changed since the 2018 IECC, that change is indicated as well.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Presentation about proper installation of flexible ducts.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

Document providing guidance about building healthy homes using building science principles.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report that considers a number of promising wall systems that can meet the requirement for better thermal control.

Web article about solar site assessment.

A guide that summarizes building materials and design considerations for increasing wildfire-resistivity of homes in areas that are prone to wildfires.

Information sheet presenting the correct methods for building an insulated cathedral ceiling.

Report describing the identification of barriers and proposed practical solutions for the design, installation, and market adoption of heat pump water heaters in new low-rise multifamily housing, focusing on studio and one-bedroom units.

A document aimed at reducing the vulnerability of a gable end roof to wind damage in a hurricane.

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Standards criteria supporting ICC HVAC duct support standards.

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Article outlining the casuses and solutions for ice dam problems.

Report on on lessons learned from building one multifamily home to the Zero Energy Ready Home program requirements.

Report summarizing approaches to addressing duct leakage in hot humid climates.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Report discussing the importance of durability and energy efficiency in building construction.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Article describing methods for designing and constructing multifamily buildings with insulating concrete forms (ICFs).

Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Report presenting lab evaluation of five heat pump water heaters available in the US market today.

Report proposing mini-split heat pumps as a new retrofit option to replace resistance heating in the Pacific Northwest.

Website explaining the LEED v4.1 program and providing a portal for those who want to investigate or start a LEED project.

Report on the long-term performance of mini-split heat pumps.