Library

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2015 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Web article showing examples of various architectural methods for shading windows.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Report providing guidance on wet floodproofing crawlspaces, unfinished basements, and garages.

Report providing guidance to homeowners and business owners on protecting crawlspaces from flood damage.

Article describing how to detail head flashing above a window.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Article describing how to stop air leaks around the windows and doors of a home.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Information sheet from FEMA on preparation for extreme heat, including measures for keeping homes cool.

Brochure about air sealing windows.

Report recording the results of a field study conducted in a single historic home in Seattle, Washington, to document the performance of Indow Windows' interior storm window inserts.

Webpage providing information on how window shading can reduce heat gain in summer and heat loss in winter.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Guide about designing and installing closed crawlspaces in the Southeast.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Document about condensation between the panes, on the inside surface of the outer glass of double pane windows.

Report outlining how conditioned crawlspaces perform better than vented crawlspaces in terms of safety, health, comfort, durability and energy consumption.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Information sheet about crawlspace insulation, including installation details.

Article discussing whether or not to seal and insulate crawlspaces.

Research study evaluating energy savings and cost effectiveness of installing low-emissivity (low-e) storm windows over existing windows in residential homes in all climate zones.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

A website by the U.S. DOE highlighting the potential energy savings from upgrading energy inefficient windows with low-emissivity.

Technical report describing a market assessment conducted on new home builders' window purchasing practices revealing insights to inform the development of thin triple-pane windows, utilizing a center pane of thin glass and krypton gas fill to achieve the performance of standard triple-pane windows...

Guide provides homeowners ways to prepare for an earthquake and protect a home against earthquake damage.

Website sponsored by DOE to provide consumers with intelligent and unbiased guidance on the best window covering for your climate, your needs, and your windows.

Web page providing an overview of window coverings such as blinds, shades, shutters, films, and storm windows.

Fact sheet describing weatherstripping materials, types, expected life expectancy, installation requirements, and pros and cons.

Fact sheet poster describing the certification of window attachment products such as storm windows, roller shades, cellular shade, and solar screens by the Attachment Energy Rating Council (AERC).

Online textbook describing energy, including energy types, and energy use in homes.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Report describing a comprehensive analysis on energy savings from multiple types of shading devices in multiple climate zones.

Webpage on the ENERGY STAR website that list products that exceed the ENERGY STAR minimum criteria for their category, with links to several product categories, including windows, HVAC, home appliances, and computer monitors.

Website for finding rebates and special offers near you on ENERGY STAR certified products. Products that earn the ENERGY STAR label meet strict energy-efficiency specifications set by the U.S. EPA helping you save energy and money while protecting the environment.

ENERGY STAR specifications for residential window, door and skylights, Version 6, effective January 1, 2015.

DOE-sponsored report describing the experimental setup and results of field studies on using interior cellular shading attachments to reduce solar heat gain in summer and reduce heat loss in winter.

Report describing the methods and results of a field evaluation of the energy performance of cellular shade window coverings.

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Report analyzing results in crawlspace retrofits in multifamily buildings.

DOE-sponsored report describing the experimental setup and results of field studies on using exterior fabric shading attachments to reduce solar heat gain, reduce glare, and improve comfort.

DOE-sponsored report describing a study investigating the energy savings potential of cellular shades in homes.