Library

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Report examining the use of smart thermostat data to detect performance degradation and optimize comfort control in home AC systems.

Research study describing experiments run in an unoccupied 1600 square foot house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.

DOE-sponsored report describing a study investigating condensation buildup on windows when using insulating shades.

Report describing the performance, cost, and carbon impacts of unitary heat pump water heaters with load-shifting controls in a shared configuration for a multi-family project, highlighting significant savings in energy usage, CO2 emissions, and utility costs.

Report describing research that helps inform best practices for air-sealing multifamily buildings in the Northeast.

Expert meeting describing meeting details for recommendations for applying water heaters in combination space and domestic water heating systems.

Expert meeting report recommending approaches to humidity control in high performance homes.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Report on the long-term performance of mini-split heat pumps.

Document providing information on the impact of various defects and the potential energy savings that can result from proper maintenance, and describing a two-step process for diagnosing and correcting faults. This document is targeted towards home performance contractors who are relatively...

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Research study using modeling to determine optimal combination(s) of components/pumps, high efficiency heat sources, plumbing configurations and controls that result in the highest overall efficiency for a hydronic system.

Research study identifying the best performing, most energy-efficient and cost- effective techniques to provide controlled mechanical ventilation and humidity control in hot- humid climates with thermally efficient building envelopes.

Report evaluating mechanical AC precooling strategies in homes as a method for improving the load factor by shifting cooling operation from on-peak to off-peak hours.

Report summarizing the results of laboratory testing of 20 advanced power strip products.

This research paper outlines residential HVAC advanced controls and sensors. It includes a technology review, applications, maintenance and commissioning, occupant behavior and a summary of the state-of-the-art technologies for advanced controls for residential HVAC.

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Fact sheet outlining the research behind how smart ventilation controls boost energy efficiency and indoor air quality, including research findings from seasonal temperature, timer, and real-time weather-based controls showing that all three systems showed potential for energy savings while...

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Report summarizing results from a study in Massachusetts that aimed to upgrade existing homes and incorporate solar thermal systems.

Fact sheet describing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Factsheet describing the importance of system charging, superheat and subcooling.