Library

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Paper describing a proposed method for quantifying tree and vegetation evapotranspiration effects on city climate

Report investigating implemention of advanced power strips for entertainment and home office electronics would reduce energy consumption across the residential market.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

This ANSI/RESNET/ICC standard provides a consistent, uniform methodology for evaluating the airtightness of building, dwelling unit, and sleeping unit enclosures and heating and cooling air distribution systems, and the air flows of mechanical ventilation systems.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Technical report describing the evaluation of air management systems in a high-rise apartment building in Toronto, Ontario, focusing on air leakage, suite depressurization, and the performance of in-suite exhaust and corridor ventilation systems.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Report covering interior energy retrofits of masonry buildings.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Web based tool providing decision-making guidance for selecting wall assembly components.

Article describing the principle of capillarity in construction materials.

Source for information about Carbon Monoxide including health effects and measures to reduce exposure.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Standard covering requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, having fuel input ratings under 12,500,000 Btu/hr.

Article describing the use of whole-house fans to provide cooling in the region surrounding Sacramento, CA.

Report covering exterior energy retrofits of masonry buildings.

Technical report describing algorithms that use communicating thermostat heating data and that were developed to optimize customer adoption of energy conservation measures, enhancing the identification of retrofit opportunities, estimating post-retrofit energy savings, and enabling home-specific...

Report examining the use of smart thermostat data to detect performance degradation and optimize comfort control in home AC systems.

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

Fact sheet describing drip irrigation for landscaping.

Website for finding policies and incentives by state for renewables and efficiency.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Website describing analyses for products and standards affecting home heating, cooling, and appliances, in regards to technical, economical, and energy efficiency pathways.

Article by Energy Saver on how to save energy with your thermostat.

Research study describing experiments run in an unoccupied 1600 square foot house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.

Website providing consumer information about ceiling fans, including specifications and buying guidance.

Factsheet describing the benefits of purchasing and installing ENERGY STAR rated fans and ventilation products.

Program criteria for residential exhaust fans used for ventilation.

DOE-sponsored report describing the experimental setup and results of field studies on using interior cellular shading attachments to reduce solar heat gain in summer and reduce heat loss in winter.

DOE-sponsored report describing the experimental setup and results of field studies on using exterior fabric shading attachments to reduce solar heat gain, reduce glare, and improve comfort.

DOE-sponsored report describing a study investigating the energy savings potential of cellular shades in homes.

DOE-sponsored report describing a study investigating condensation buildup on windows when using insulating shades.

Report describing the performance, cost, and carbon impacts of unitary heat pump water heaters with load-shifting controls in a shared configuration for a multi-family project, highlighting significant savings in energy usage, CO2 emissions, and utility costs.

Report on the performance of range hood exhaust fans.

Expert meeting describing meeting details for recommendations for applying water heaters in combination space and domestic water heating systems.

Expert meeting report recommending approaches to humidity control in high performance homes.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...