Library

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Web page describing essential guidelines and recommendations for optimal installation of ductless heat pumps in cold climates, ensuring maximum heating performance and long-term satisfaction for homeowners, supported by research-backed insights and detailed resources.

Standard outlining industry procedure for sizing residential duct systems.

Standard providing guidance on how to select, size, and locate the supply air diffusers, grilles and registers, and the return grilles.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Report investigating implemention of advanced power strips for entertainment and home office electronics would reduce energy consumption across the residential market.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Training manual on how to locate ducts within conditioned space and compact design.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Standard covering requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, having fuel input ratings under 12,500,000 Btu/hr.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Technical report describing algorithms that use communicating thermostat heating data and that were developed to optimize customer adoption of energy conservation measures, enhancing the identification of retrofit opportunities, estimating post-retrofit energy savings, and enabling home-specific...

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

Fact sheet describing drip irrigation for landscaping.

Website for finding policies and incentives by state for renewables and efficiency.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Website describing analyses for products and standards affecting home heating, cooling, and appliances, in regards to technical, economical, and energy efficiency pathways.

Article by Energy Saver on how to save energy with your thermostat.

Website providing consumer information about ceiling fans, including specifications and buying guidance.

DOE-sponsored report describing the experimental setup and results of field studies on using interior cellular shading attachments to reduce solar heat gain in summer and reduce heat loss in winter.

DOE-sponsored report describing the experimental setup and results of field studies on using exterior fabric shading attachments to reduce solar heat gain, reduce glare, and improve comfort.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Webpage describing homeowner resources program designed to strengthen homes and commercial buildings against severe weather such as high winds, hail, hurricanes, and even tornadoes.

Presentation about proper installation of flexible ducts.

Webpage providing basic information on various types of heat pumps and their applications in Massachusetts.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Standards criteria supporting ICC HVAC duct support standards.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Report on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Guidance on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.