Library

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2015 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Information sheet about unvented fireplaces and combustion safety.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Website describing indoor air quality, and common indoor pollutants and how to reduce exposure to them.

Website describing archived program inforamtion for the Air Sensors International Conference, hosted by the University of California, Davis.

American Cleaning Institute website homepage.

Standard detailing the specific requirements for all face, back, and inner ply grades as well as formaldehyde emissions, moisture content, tolerances, sanding, and grade marking which was published in 2020, can be acquired through a subscription with the ANSI webstore.

Updated detailed information about Formaldehyde.

Report explaining how to develop, practice, and maintain emergency plans that reflect what must be done before, during, and after a disaster to protect people and their property.

Guidance from HUD, EPA, NIH, and FEMA for workers who deal directly with asbestos.

Document describing recent discussions on indoor carbon dioxide (CO 2) levels.

Report describing information for builders and retrofitters about eliminating hazards and coincidental energy losses that come from attached garages.

Source for information about Carbon Monoxide including health effects and measures to reduce exposure.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Information sheet summarizing inspection and testing of combustion appliances taught during the 2006 Florida whole-house weatherization training as part of the U.S. Department of Energy’s Hot Climate Initiative.

A website explaining how to properly dispose of old refrigeration and air-conditioning equipment.

Brochure helping homeowners identify hazards, work with contractors to remove the hazards, help ensure the work is done properly, and educate when they can return safely to the home.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Article describing the causes of wood decay and moisture issues.

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Website providing information on preparing to stay or go, shelter-in-place procedures, and additional resources.

Web article describing the evolution of evaporative coolers, water usage of evaporative coolers, and links to information on selecting an evaporative cooler.

Article describing benefits of ECM motors and how they can be installed as retrofit motors in HVAC equipment.

Report on the performance of range hood exhaust fans.

Fact sheet describing indoor air quality (IAQ), including information on common sources of indoor air pollutants and best practices for improving IAQ.

Documents describing Flood Resistant Provisions of the international codes (including the international building, residential, exiting building, mechanical, plumbing, fuel gas, fire, swimming pool and spa, private sewage disposal, and code council performance codes) and summaries of changes from the...

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Report presenting the results from several demonstrations of a new method for sealing building envelop air leaks.

ASHRAE Q&A addressing HVAC filtration and disinfection for reducing the spread of COVID-19.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Standard describing GREENGUARD Emission Criteria for use with GREENGUARD Certification Program for Low Emitting Products.

Guidance from HUD for volunteer team leaders, project managers and supervisors who work in recovery and rebuilding after natural disasters.

Report about opportunities for ventilation when traditional methods are limited by weather conditions or by contaminants in the outdoor air.

Webpage providing maps and information to assess the particular hazards and risks for an area.

Webpage that describes health problems that can be caused by secondhand smoke.