Library

Technical research paper explaining how thermal mass influences heating and cooling energy needs.

Design guide providing technical information regarding building with thermal mass.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Information sheet about types and installation of insulation.

Guide providing information about controlling rainwater through use of drainage planes.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Website describing proper methods for installing vinyl siding on homes.

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

A builder checklist guide for the water management of properties with appropriately-designed building technologies.

This text is one of series of supporting documents that provide guidance on implementing the World Health Organization (WHO) Guidelines for drinking-water quality; intended to support improvement of water safety within buildings.

Web-based manual providing guidance for removal and preventing entry of nuisance wildlife.

Article explaining the importance of expansion tank knowledge.

Website describing how wildfires spread and how fuels, weather, and topography influence fires.

A list of exterior building products and materials approved for use in wildland urban interface zoned homes. These products are non-combustible or ignition-resistant.

Presentation about the combustion properties of wood.

Fact sheet describing the moisture properties of wood.

Manual providing design and construction provisions for connections, wall systems, floor systems, and roof systems; a range of structural elements are covered, including sawn lumber, structural glued laminated timber, wood structural sheathing, I-joists, and trusses.

Report summarizing information on wood as an engineering material, and presents properties of wood and wood-based products of particular concern to the architect and engineer.

Fact sheet describing typical wood-pile-to-beam connections; basic construction guidance for various connection methods, including connections for misaligned piles; and pile bracing connection techniques; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...