Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Guide providing engineering seismic design and building practices based on post-earthquake research.

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Information sheet about unvented fireplaces and combustion safety.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

Website describing indoor air quality, and common indoor pollutants and how to reduce exposure to them.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Website describing archived program inforamtion for the Air Sensors International Conference, hosted by the University of California, Davis.

American Cleaning Institute website homepage.

Standard detailing the specific requirements for all face, back, and inner ply grades as well as formaldehyde emissions, moisture content, tolerances, sanding, and grade marking which was published in 2020, can be acquired through a subscription with the ANSI webstore.

Updated detailed information about Formaldehyde.

Report explaining how to develop, practice, and maintain emergency plans that reflect what must be done before, during, and after a disaster to protect people and their property.

Guidance from HUD, EPA, NIH, and FEMA for workers who deal directly with asbestos.

Document describing recent discussions on indoor carbon dioxide (CO 2) levels.

Report describing information for builders and retrofitters about eliminating hazards and coincidental energy losses that come from attached garages.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Information sheet about sealing combustion appliances to ensure good indoor air quality.

Information sheet about insulating slabs.

Expert meeting focusing on identifying gaps and barriers in combustion safety that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy...

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Source for information about Carbon Monoxide including health effects and measures to reduce exposure.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Guide about designing and installing closed crawlspaces in the Southeast.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Website discussing building foundation problems caused by settling soil in Colorado.

Information sheet summarizing inspection and testing of combustion appliances taught during the 2006 Florida whole-house weatherization training as part of the U.S. Department of Energy’s Hot Climate Initiative.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Report covering insulating crawlspaces.

Article describing the process of constructing concrete walls

A website explaining how to properly dispose of old refrigeration and air-conditioning equipment.

Brochure helping homeowners identify hazards, work with contractors to remove the hazards, help ensure the work is done properly, and educate when they can return safely to the home.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Article describing the causes of wood decay and moisture issues.

Report providing guidance on designing buildings to be flood resistant.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Website providing information on preparing to stay or go, shelter-in-place procedures, and additional resources.