Skip to main content

Showing 1 - 9 of 9 results:

Publication Date
·
Author(s)
International Code Council
·
Organization(s)
ICC
Description
2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.
Publication Date
·
Author(s)
International Code Council
·
Organization(s)
ICC
Description
2012 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.
Publication Date
·
Author(s)
Less Brennan,
et al.
·
Organization(s)
Lawrence Berkeley National Laboratory,
LBNL
Description
The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.
Publication Date
·
Author(s)
Burdick Arlan
·
Organization(s)
Integrated Building and Construction Solutions,
IBACOS
Description
Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.
Publication Date
·
Author(s)
Brand Larry
·
Organization(s)
Partnership for Advanced Residential Retrofit,
PARR,
Gas Technology Institute,
GTI Energy
Description
This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.
Publication Date
·
Author(s)
Arena Lois
·
Organization(s)
Consortium for Advanced Residential Buildings,
CARB,
Steven Winter Associates,
SWA,
National Renewable Energy Laboratory,
NREL
Description
Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.