Library

2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2009 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2012 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2015 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2018 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2018 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Article describing utility rates, net metering policies, installation costs, financial incentives, and other info for both consumers who are interested in installing renewable energy systems and for energy justice and clean energy advocates.

Information sheet about unvented fireplaces and combustion safety.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Fact sheet providing information on building-scale and utility-scale battery storage for disaster resistance.

This directory contains the I=B=R Ratings for cast-iron, steel, aluminum and copper boilers, baseboard and finned tube radiation, indirect-fired water heaters, effective as of the date of this publication.

Information sheet about sealing combustion appliances to ensure good indoor air quality.

Expert meeting focusing on identifying gaps and barriers in combustion safety that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy...

Source for information about Carbon Monoxide including health effects and measures to reduce exposure.

Case study about the grid integration of electrical vehicle supply equipment.

Information sheet summarizing inspection and testing of combustion appliances taught during the 2006 Florida whole-house weatherization training as part of the U.S. Department of Energy’s Hot Climate Initiative.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Website for CEE, the US and Canadian consortium of natural gas and electric efficiency program administrators.

Standard covering requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, having fuel input ratings under 12,500,000 Btu/hr.

Webpage from FireSafe Marin explaining the different landscaping strategies near homes to lower the risk of a home's ignition from wildfire.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Information sheet with safety tips for home owners on proper maintenance of clothes dryers.

Technical report detailing the vulnerabilities of the U.S. electric grid to weather-related failures.

Report outlining how Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

List of guidelines for plants and their fire resistance from FIRESafe Marin.

Updated wildfire risk assessment, community impacts, and building science measures following the disastrous 2020 wildfire season in the western U.S.

A webpage discussing how water heater expansion tanks operate and how to repair them.

Report addressing the current state of these technologies and the challenges of adapting these to the GEB context.

Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Webpage published by the National Fire Protection Agency (NFPA) that lists more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Book with indepth information about hydronic systems for residential and commercial buildings.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Standard containing requirements for carbon monoxide (CO) detection and warning equipment intended to protect lives by warning occupants of the presence of CO in sufficient time to allow occupants to escape or take other appropriate action.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Report evaluating mechanical AC precooling strategies in homes as a method for improving the load factor by shifting cooling operation from on-peak to off-peak hours.

Second part of an article series focusing on servicing high efficiency modcon boilers. This part focuses on paperwork and follow-up communication with the homeowner for scheduling annual maintenance.

Article describing the author's experiences in owning and servicing a modcon boiler.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Report describing use of the Energy in Modular (EMOD) method to design, produce, and deliver affordable, net-zero energy, low-carbon, and healthier buildings through industrialized (factory) construction of modular buildings; modeling of whole buildings and subassemblies of components, pods, panels...

Document outlining important safety considerations of ventless fireplaces.

Infographic explaining what a seismic shut-off valve is and providing frequently asked questions.

Presentation about the combustion properties of wood.