Library

Fact sheet describing guidance for choosing appropriate materials and using proper construction practices when rebuilding, repairing, or renovating a home to increase its resistance to fires.

Article describing the causes of wood decay and moisture issues.

Article from Stephen L. Quarles on fire resistant decking design and materials recommendations.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Report covering the rainwater performance of building assemblies.

Information sheet with safety tips for home owners on proper maintenance of clothes dryers.

Report on problems and solutions with EIFS stucco wall cladding systems.

Brochure providing information on the design of the EPA Region 8 headquarters in Denver, CO.

Guidance documents describing Erosion Control Blankets (ECBs) use as a construction material that provides temporary cover and support for establishing vegetation on bare soil. ECB holds topsoil and seed (typically grass) in place to minimize erosion during germination of seed.

An example of a commercially available thermally expansive fire stopping product for controlling the spread of fires in a rainscreen cavity.

Summary document describing flood resistant building materials and some tips for building flood resistant walls.

Technical bulletin describing a set of standards for building materials able to withstand flood waters as needed with wet floodproofing.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Guidelines from the University of California Cooperative Extension on how fires spread, how homes typically burn, and what homeowners can do to prepare their homes for wildfire season.

A guide for designers, architects, engineers, and fire experts on how to design rainscreen and ventilated cavities such that they don’t contribute to the spread of a fire.

Webpage from FireSafe Marin explaining the vulnerability of different deck setups and materials.

Article from CAL FIRE on fire-resistant landscaping to mitigate ignition of homes.

List of guidelines for plants and their fire resistance from FIRESafe Marin.

Updated wildfire risk assessment, community impacts, and building science measures following the disastrous 2020 wildfire season in the western U.S.

Wildfire construction guidelines from the Colorado State Forest Service focusing on site design and building materials to mitigate damage to homes in wildfire-prone areas.

A webpage discussing how water heater expansion tanks operate and how to repair them.

Guide from Building Science Corporation on how to construct a flood and hurricane resistant home.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Standard describing GREENGUARD Emission Criteria for use with GREENGUARD Certification Program for Low Emitting Products.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

Brochure describing advanced framing techniques.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report containing 37 fact sheets that provide technical guidance and recommendations concerning the construction of coastal residential buildings.

A guide that summarizes building materials and design considerations for increasing wildfire-resistivity of homes in areas that are prone to wildfires.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Factsheet describing proper methods for installing vinyl siding and soffit coverings in high wind and coastal areas.

Checklist for verifying FORTIFIED levels and documentation needed.

A structural insulated panel (SIP) roof has no embedded lumber in the structure, and therefore nothing substantial for attaching PV array and solar hot water mounts. Single or double lumber splines could be put into the panels, or I-joists at 4-foot intervals could be added.

Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Wildfire guidance for homes located in the wildland urban interface, focused on site design and individual pieces of the home.

Ignition resistant residential construction and landscaping guidelines from FireSafe Montana.

An impact test report from projectile missile tests against brick veneer, verifying that brick veneers perform well to resisting hurricane force wind driven debris.

Site showing flame spread ratings and definitions for common building materials.

Article from Building Science Corporation explaining 'wash and wear buildings' that are designed to be flooded and washed out afterwards.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Report providing general guidelines for the installation of rolled erosion control products.

EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

Webpage published by the National Fire Protection Agency (NFPA) that lists more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.