Library

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

Article describing a numerical model that can be used to size foundation heat exchanger (FHX) systems.

Website describing wet floodproofing measures to prevent against structural damage, internal damage and damage to electrical components.

Commercial website providing images to subscribers.

Document describing living shoreline techniques for shoreline stabilization.

Report identifying Building America and 2021 International Energy Conservation Code climate zone designations for every county in the United States; where a county's climate zone designation has changed since the 2018 IECC, that change is indicated as well.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

Document providing guidance about building healthy homes using building science principles.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report that considers a number of promising wall systems that can meet the requirement for better thermal control.

Web article about solar site assessment.

A guide that summarizes building materials and design considerations for increasing wildfire-resistivity of homes in areas that are prone to wildfires.

Information sheet presenting the correct methods for building an insulated cathedral ceiling.

Report describing the identification of barriers and proposed practical solutions for the design, installation, and market adoption of heat pump water heaters in new low-rise multifamily housing, focusing on studio and one-bedroom units.

A document aimed at reducing the vulnerability of a gable end roof to wind damage in a hurricane.

Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Article outlining the casuses and solutions for ice dam problems.

Report on on lessons learned from building one multifamily home to the Zero Energy Ready Home program requirements.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Report discussing the importance of durability and energy efficiency in building construction.

Article describing methods for designing and constructing multifamily buildings with insulating concrete forms (ICFs).

Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Website explaining the LEED v4.1 program and providing a portal for those who want to investigate or start a LEED project.

Webpage published by the National Fire Protection Agency (NFPA) that lists more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

Book with indepth information about hydronic systems for residential and commercial buildings.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

Resources describing the National Flood Insurance Program's technical bulletins for flood zone construction, including foundation walls, corrosion protection, floodproofing, and breakaway walls among other topics.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Webpage presenting updated maps for annual average temperature and precipitation in the contiguous U.S.

An interactive website providing facts on new, single-family homes constructed in 2019.

An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.

An NFPA standards document that provides minimum requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.