Library

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2009 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

Document describing portions of the flood provisions from the 2018 editions of the IBC, IRC, IEBC, IMC, IPC, IFGC, IFC, ISPSC, IPSDC, and ICC Performance Code.

State building code containing general building design and construction requirements relating to fire and life safety, structural safety, energy efficiency, and access compliance; based on the 2021 International Building Code.

Report assessing building codes for the 18 Atlantic and Gulf coast states which are most prone to hurricanes, as of 2018.

Webpage providing guidance on the 45L tax credit, assembling the most relevant information for Northwest builders to maximize their tax credit and build energy efficient homes.

Standard outlining materials and installation methods by using commercial building wraps.

Report providing product manufacturers, fabricators, contractors and installers, design professionals, owners, and real estate developers with technical performance and cost guidance for scalable zero-carbon-aligned new construction pathways and retrofit packages to achieve zero carbon retrofits and...

Voluntary specification for residential, commercial/multifamily, and industrial water heaters and heating systems.

Wepage by ABBA providing standards concerning air barrier assemblies, divided into building assemblies for walls, roofs and foundations and sub-divided into specific types of walls, roofs and foundations. Air barrier assemblies are made up of air barrier materials and connected with air barrier...

Webpage containing technical manuals and standards from ACCA, covering design, installation and maintenance for residential and light commercial HVAC systems and providing technical guidance in the indoor environment industry.

Wepage containing links to door standards from the Builders Hardware Manufacturers Association addressing a range of features and characteristics of doors.

This specification specifies the test method for measuring heat flow through building assemblies or components.

This specification requires that insulated vinyl siding demonstrate a thermal insulation value of R-2.0 or greater. The specification also establishes other performance requirements and test methods including materials properties and dimensions, warp, shrinkage, impact strength, expansion...

Webpage showing standards developed by ASHRAE that define the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. Additional technical guidance is provided on...

Web-based mapping tool offering a fast, reliable way to look up key design parameters specified in Standard ASCE 7-10, 7-16, or 7-22 for a specific address or location which is free to use and can look up data for eight different environmental hazard types: wind, tornado, seismic, ice, rain, flood...

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Webinar answering code-related questions on duct leakage tests, moisture levels in attics and crawlspaces, combustion equipment in conditioned attics, ventilation in multifamily buildings, and continuous insulation in residential construction.

Subprogram of the California Statewide Codes and Standards Program designed to help cities and counties to adopt above-state-code ordinances.

A website explaining the various shades of light, from warm to cool colors, with a visual diagram illustrating the various shades of light.

List of commercial heat pump water heater systems that comply with NEEA's Advanced Water Heating Specification.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Website to support the state of Vermont transition to a more affordable and cleaner future by affiliate with partners throughout Vermont to save customers money, strengthen our state’s economy, and lower carbon emissions.

U.S. Code of Federal Regulations energy and water conservation standards for consumer products including home appliances and HVAC equipment.

ENERGY STAR website outlining the program requirements for NextGen, an EPA initiative aimed at advancing energy efficiency in residential construction.

Website showing compliance timelines for various versions of the ENERGY STAR Single-Family New Home program requirements with links to national program requirements documents and checklists.

Section 608 establishes EPA’s National Recycling and Emission Reduction Program designed to reduce emissions related to maintaining, servicing, repairing, and disposing of air conditioning or refrigeration equipment.

U.S. Code describing excess flow valve installation requirements.

A website providing information on funding for mitigation programs to reduce disaster losses under FEMA's Hazard Mitigation Grant Program.

Webpage containing links to all editions of the Florida Building Code.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Website describing ways to prevent home house fires.

Code providing minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Research report detailing Florida Solar Energy Center (FSEC) partnership with Manatee County Habitat for Humanity to design a compact, Zero Energy Ready Home in Florida, tackling challenges like equipment sizing and indoor air quality, offering insights for projects surpassing building code...

Standard using deficiency-based and systematic procedures that use performance-based principles to evaluate and retrofit existing buildings to withstand the effects of earthquakes. The current version of this standard was published in the year 2017, and is available in both digital and print...

Factsheet describing the use of rigid foam insulation to meet energy efficiency requirements and minimize fire risks.

Website providing a link for purchasing NFPA 1141, Standard for Fire Protection Infrastructure for Land Development in Wildland, Rural, and Suburban Areas.

Standard 680 establishes definitions, classifications, test requirements, data requirements, ratings, operating requirements, marking and nameplate data and conformance conditions for residential air filter equipment.

The Standard Work Specifications (SWS) are a tool for industry guidance to ensure effective, durable, and safe work is performed during home upgrades.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Document with information on preventing termites when using ICFs.

State building energy code for the State of Washington.

State code requiring energy efficiency measures in residential buildings.