Library

Standard providing a methodology for calculating Energy Rating Index for code compliance.

2015 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2015 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2015 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

2020 energy efficiency code for the state of Florida.

Residential building code for the State of Florida.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Document presenting the minimum recommended requirements necessary for the design and construction of new buildings and other structures to resist earthquake ground motions throughout the United States.

Standard outlining materials and installation methods for a liquid-applied vapor permeable air barrier systems located in the non-accessible part of the wall.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Standard detailing the specific requirements for all face, back, and inner ply grades as well as formaldehyde emissions, moisture content, tolerances, sanding, and grade marking which was published in 2020, can be acquired through a subscription with the ANSI webstore.

Updated detailed information about Formaldehyde.

ASHRAE Standard prescribing an field evaluation and test method to measure and score the performance of unitary HVAC systems.

Standard providing a methodology for evaluating the installation quality of unitary HVAC systems.

YouTube channel featuring 90+ videos to educate Bay Area homeowners and contractors about seismic retrofitting, including information for various home and construction types.

Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.

A presentation describing the details of the ENERGY STAR Multifamily New Construction program requirements.

Website providing information on U.S. residential and commercial building codes including adoption status.

Homepage for DOE's Zero Energy Ready Homes program.

Standard providing minimum functionality requirements for earthquake-actuated automatic gas shutoff devices; applicable to systems carrying natural gas and propane, the devices are used in piping, equipment, and appliances typically found in structures of three stories or less.

Free online tool for sizing central heat pump water heater systems.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Webpage for finding all the information you need to start shopping for ENERGY STAR certified products, including product details, rebates, and retailers near you.

Program criteria for residential exhaust fans used for ventilation.

Webpage developed by OSHA to provide workers and employers useful, up-to-date information on fall protection.

Website of the Federal Emergency Management Agency

Updated wildfire risk assessment, community impacts, and building science measures following the disastrous 2020 wildfire season in the western U.S.

Website providing certifications and codes for automatic gas shut off valves in the state of California.

Website providing certified rating programs to help manufacturers, builders, contractors and homeowners compare performance of ventilation products for air flow, sound, and other performance characteristics.

Checklist for verifying FORTIFIED levels and documentation needed.

Publication describing the requirements and procedures for the certified performance ratings program for residential ventilation products administered by the Home Ventilating Institute.

Website providing an online directory of more than 3,600 residential ventilation products lisiting flowrates, sones, watts, and other performance metrics; all listed products have been tested by the Home Ventilating Institute.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

Website describing the wildland-urban interface code and providing links to resources.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

NABCEP main webpage.

An interactive website providing facts on new, single-family homes constructed in 2019.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

Website describing the USRC, which "brings an unparalleled level of capability to the mission of improving community resilience in the built environment."