Library

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2012 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

Standard providing a methodology for calculating Energy Rating Index for code compliance.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

2019 version of California's plumbing code.

Website of the Cold Climate Housing Research Center.

Checklist for the DOE Zero Energy Ready Home National Program Requirements Mandatory Requirement 7 (Renewable Ready).

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Article describing the history and the current debate about how to adjust the Florida building codes.

Fact sheet describing foundation design criteria, foundation types suitable for coastal environments, and addressing foundations for high-elevation coastal areas (e.g., bluff areas); also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Standard that applies to storage water heaters, instantaneous water heaters, and circulating water heaters including booster water heaters; the current version of this standard was published in the year 2019 and it is available for purchase along with a digital preview on the ANSI webstore page.

Website article touring areas hit hardest by tornadoes to see how they are building differently to protect against the next big twister.

Fact sheet describing the function of housewrap, its attributes, and common problems associated with its use, including housewrap vs. building paper and housewrap installation; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing effects of planning, siting, and design decisions on coastal home costs, including initial, operating, and long-term costs; risk determination; and the effect on costs of meeting and exceeding code and NFIP design and construction requirements; also published in FEMA P-499...

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

Standard providing a procedure for determining fenestration attachment product U-factors.

Standard for determining fenestration attachment product SHGC and visible transmittance.

Standards for paints and coatings.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Fact sheet describing an alternative to piles in V Zones and A Zones in coastal areas where soil properties preclude pile installation, but the need for an “open foundation system” still exists and recommendations for good masonry practices in coastal environments; also published in FEMA P-499 “Home...

Detailed requirements for testing, exposure modeling, and allowable limits for modeled indoor air concentrations.

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

Fact sheet providing the wind resistant provisions of the 2015 International Residential Code.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

Report providing guidance on how to improve the wind resistance of existing residential buildings in Mississippi and across the Gulf Coast.