Library

Standard providing a methodology for calculating Energy Rating Index for code compliance.

2015 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2015 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Updated detailed information about Formaldehyde.

Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.

Standard providing minimum functionality requirements for earthquake-actuated automatic gas shutoff devices; applicable to systems carrying natural gas and propane, the devices are used in piping, equipment, and appliances typically found in structures of three stories or less.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Program criteria for residential exhaust fans used for ventilation.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Fact sheet describing foundation design criteria, foundation types suitable for coastal environments, and addressing foundations for high-elevation coastal areas (e.g., bluff areas); also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing the function of housewrap, its attributes, and common problems associated with its use, including housewrap vs. building paper and housewrap installation; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing effects of planning, siting, and design decisions on coastal home costs, including initial, operating, and long-term costs; risk determination; and the effect on costs of meeting and exceeding code and NFIP design and construction requirements; also published in FEMA P-499...

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

Standard providing a procedure for determining fenestration attachment product U-factors.

Standard for determining fenestration attachment product SHGC and visible transmittance.

Standards for paints and coatings.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Fact sheet describing an alternative to piles in V Zones and A Zones in coastal areas where soil properties preclude pile installation, but the need for an “open foundation system” still exists and recommendations for good masonry practices in coastal environments; also published in FEMA P-499 “Home...

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard covering the installation of fenestration products in new and existing construction which was published in the year 2007, and is available for preview and purchase at the referenced link.

Detailed requirements for testing, exposure modeling, and allowable limits for modeled indoor air concentrations.

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

Report describing seismic retrofit of historical buildings.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

Report providing guidance on how to improve the wind resistance of existing residential buildings in Mississippi and across the Gulf Coast.