Library

Article discussing indoor water management.

Webpage providing all versions of the International Building Code (IBC) which is code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to...

List of acceptance criteria for the ICC.

Webpage describing current and past versions of the International Energy Conservation Code (IECC), establishing a baseline for energy efficiency with performance standards for building envelopes, mechanical systems, lighting systems and service water heating systems in homes and commercial...

Webpage with all versions of the International Fire Code (IFC), code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials...

Website with all versions of the International Plumbing Code (IPC), code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Webpage providing the latest versions of the International Wildland-Urban Interface Code (IWUIC), code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides...

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Federal Trade Commission (FTC) Regulation 16 CFR Part 460: Federal regulation on labeling of home insulation products.

Report targeting the growing number of homes utilizing deep retrofit measures and new construction practices to realize sufficiently lower infiltration levels that require mechanical ventilation as prescribed by ASHRAE Standard 62.2.

Report documenting the measured performance of six residential ENERGY STAR vapor compression dehumidifiers.

Website describing the wildland-urban interface code and providing links to resources.

Guide describing landscaping tips for healthy and regionally-based gardens, including maintenance, mulching, water efficiency, and plant resources.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Website describing the EPA Lead Renovation, Repair, and Painting Rule that establishes requirements to reduce lead exposure for firms and individuals performing renovations that might disturb painted surfaces in buildings and homes built pre 1978 that might be occupied by children.

Article describing a technique for installing a skylight and avoiding potential water leaks with the use of a peel-and-stick (or self-adhesive) membrane under the flashing.

A publication describing how to protect coastal investments by adapting to natural processes and protecting coastal environments and shorelines.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report focusing on managing the driving forces that move air and water vapor across the building envelope.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Siding installation guide for Ply Gem Siding Group products.

Document describing good practices for insulating basements in new and existing homes.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Case study about how to properly tape insulating sheathing drainage planes.

Document providing information on basement insulation, air sealing and water management retrofits.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

An installation training manual discussing the installation of metal roofing materials and related accessories, for both new construction and retrofit projects.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

Webpage for the CEC’s Modern Appliance Efficiency Database System

List of appliance brands and models, showing their performance and efficiency as tested by the appropriate standard.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report describing the work conducted for high performance hybrid assemblies.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report about exterior sheathing insulation and inward driven moisture issues.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

Document describing a hygrothermal modeling study, including all of the US climate zones, a range of interior humidity levels and numerous arrangements and types of insulation.

Brochure discussing specific practices for mitigating moisture and mold during the construction process.

Document describing common questions about moisture, mold, and wood.

Information sheet about mold mitigation.

RESNET standards aimed to ensure that accurate and consistent home energy ratings are performed by accredited home energy rating providers through their raters nationwide.

NABCEP main webpage.