Library

2009 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2009 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Information sheet providing details on the vapor permeance of different types of materials used in building assemblies.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Research study examining the effective moisture penetration depth (EMPD) model and its suitability for building simulations.

Research study searching for combinations of existing technologies that could enable a minimally invasive, cost-competitive, easily deployable method of upgrading soil-side foundation insulation in existing buildings.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Report exploring four questions to determine the level of risk associated with adding drained exterior insulation to the exterior of an existing home during an energy retrofit.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

Report about exterior sheathing insulation and inward driven moisture issues.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

RESNET standards aimed to ensure that accurate and consistent home energy ratings are performed by accredited home energy rating providers through their raters nationwide.

Standard for installing manufactured homes, including specifications and procedures, for installation of utility connections of a manufactured home.

This CASE report proposes updates and revisions to the standards for residential swimming pool filtration pumps, new and replacement single phase pump motors under 5 horsepower (HP), controllers, portable electric spas as well as expanding the scope of the current standards to include light emitting...

Report documenting actual energy savings of a retrofit project in Boulder, CO.

Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Research study describing research underway to better understand building thermal energy modeling tools.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2013, and is available for...

Report describing filtration, distillation, and disinfection methods of water treatment.