Library

Standard describing a test method for mold growth resistance on interior coatings such as paint in an environmental chamber; the 2021 version of this standard is available for preview and purchase at the referenced link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Standard describing two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone which was published in the year 2022 and is available for preview and purchase at the reference link.

The Standard Work Specifications (SWS) are a tool for industry guidance to ensure effective, durable, and safe work is performed during home upgrades.

Report recommending strategies and approaches that the Federal government and other stakeholders may take to encourage and aid States and local communities in the adoption of the most current building codes.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Presentation on urban land use and sustainable building design.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Standard covering minimum required health and safety diagnostics and specifications for BPI's Building Analyst Professional certification.

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

Document with information on preventing termites when using ICFs.

Fact sheet describing the test procedure for wind and wind driven rain resistance of discontinuous roofing systems.

Webpage describing the standards, seminars, exams, etc regarding testing, adjusting and balancing (TAB).

Fact sheet providing the wind resistant provisions of the 2015 International Residential Code.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Fact sheet describing building codes, seismic codes, and code enforcement.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Fact sheet poster describing a DOE tool that walks homeowners through a series of simple questions to produce a list of retrofit recommendations to improve the energy efficiency, indoor air quality, and durability of the homeowners’ home, while also lowering their carbon footprint.

Report describing seismic retrofit of historical buildings.

Article about installing balanced ventilation systems.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

Website regarding the town of Marana's services and departments.

Research study describing research underway to better understand building thermal energy modeling tools.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

NAFA’s user guide for understanding ANSI/ASHRAE Standard 52.2-2012.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

Manual describing scientific, technical, and practical information needed to work with communities on urban forestry, including a section on trees and construction.

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Report describing the formation of icicles and ice dams along poorly ventilated roofs and how to mitigate ventilation issues with insulation and vents.

Information sheet about proper ventilation and air sealing.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2013, and is available for...

This report examines indoor air quality in post-2013 homes across various climates, focusing on contaminant levels, ventilation equipment usage, and control measure impact, with regional data from Florida, Georgia, and South Carolina.

ENERGY STAR overview on certified ventilation fans.

Standard that provides procedures and methods for meeting minimum ventilation and indoor air quality requirements to engineers, design professionals, owners, and jurisdictional authorities where model codes have been adopted. This is the current version of the standard, which was published in the...

Report describing the use of attic ventilation to control moisture in cathedral roofs and avoid the formation of ice dams.

Products and specification for a State of California-compliant earthquake-actuated automatic gas shutoff valve.

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

State building energy code for the State of Washington.