Library

Brochure describing HVAC filter options for efficiency and IAQ.

Paper describing testing for the first of a series of six near net-zero-energy test houses, using the results to work towards the construction of a true net-zero-energy house.

Report discussing Building America whole house systems research within the broad effort to reduce or eliminate the environmental impact of building and provides specific recommendations for future Building America research based on Building Science Corporations experience with several recent...

Website regarding the town of Marana's services and departments.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Research study describing research underway to better understand building thermal energy modeling tools.

Information sheet about types and installation of insulation.

Website with consumer information about various types of lighting.

Case study about affordable housing in a mixed, humid climate.

Information sheet providing definitions, applications, and techniques for applying air barriers.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Guide providing information about controlling rainwater through use of drainage planes.

NAFA’s user guide for understanding ANSI/ASHRAE Standard 52.2-2012.

Information sheet describing the function of a vapor barrier, and methods to retard the migration of water vapor.

Report reviewing unvented roof assemblies, such as conditioned attics and unvented cathedral ceilings that are becoming common in North American construction.

Document summarizing the various papers on unvented conditioned cathedralized attics found on BSC's website.

Report focusing on the performance and durability of unvented-cathedralized attics in hot-humid climates with both tile and asphalt shingle roofing.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

Manual describing scientific, technical, and practical information needed to work with communities on urban forestry, including a section on trees and construction.

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Report on investigating the effectiveness of using solar thermal water heaters to address heat losses from piping while recirculating water in multifamily buildings.

Research study comparing TRNSYS Type 604 pipe model against laboratory pipe heat loss test data and detailed field monitoring data.

Research report that validates Pinhole Insulation®, offering a cost-effective, minimally invasive solution for enhancing insulation and air sealing in enclosed roof cavities, improving R-value by 60% compared to traditional methods.

Report discussing the measured variability in indoor space temperatures in a set of 60 homes located in Florida, New York, Oregon, and Washington.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Information sheet about proper ventilation and air sealing.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2013, and is available for...

Standard that provides procedures and methods for meeting minimum ventilation and indoor air quality requirements to engineers, design professionals, owners, and jurisdictional authorities where model codes have been adopted. This is the current version of the standard, which was published in the...

This report describes how twenty homes were tested and monitored in the Zone 2 climate of Houston, Texas, U.S.A., to evaluate the humidity control performance and operating cost of six different integrated dehumidification and ventilation systems that could be applied by production homebuilders.

Document outlining important safety considerations of ventless fireplaces.

Report summarizing NRELs efforts to develop diagnostic test cases to conduct accurate energy simulations when phase change materials (PCMs) are modeled in residential buildings.

Research study developed and verified a fuel oil flow field measurement protocol that is cost effective and can be performed with little training for use by the BB program as well as other weatherization programs and building science researchers.

Products and specification for a State of California-compliant earthquake-actuated automatic gas shutoff valve.

Document describing the measured annual performance data from 12 recent-vintage very low energy homes in the US.

Publication with installation guidance for vinyl siding.

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

State building energy code for the State of Washington.

State code requiring energy efficiency measures in residential buildings.

Information sheet with the Waste Reduction Model (WARM), designed to help solid waste planners and organizations track and voluntarily report greenhouse gas (GHG) emissions reductions from several different waste management practices.

Document providing guidance on water management concepts and applications for residential buildings.

Report summarizing current research, summarizes issues that have been experienced with current best practices, and recommends ways in which the best practices can be improved for water managing sheathings.

This text is one of series of supporting documents that provide guidance on implementing the World Health Organization (WHO) Guidelines for drinking-water quality; intended to support improvement of water safety within buildings.

Fact sheet describing the home certification organization, Home Innovation Research Labs and their requirements for whole house water management in a checklist format as well their compliance with certified Water Rating Index (WRI), organization scope, and information verifiers.

Webpage describing the home certification organization, 24/7 Certifications and their requirements for whole house water management in a checklist format.

Fact sheet describing the home certification program CHEERS and its requirements for whole house water management in a checklist format.

Webpage describing the home certification program, Home Innovation Research Labs' requirements for whole house water management.

Webpage describing the home certification organization, RESNET and its requirements for whole house water management in a checklist format as well as the scope, information verifiers, and partners of the program.

Fact sheet describing how the Environmental Protection Agency ensures labeled homes meet the WaterSense efficiency requirements for whole house water management including a list of requirements and a data chart.