Library

Article describing how insulated siding can save homeowners energy by providing continuous exterior insulation.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

Article outlining the use of spray polyurethane foam in residential buildings.

Webpage providing all versions of the International Building Code (IBC) which is code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to...

List of acceptance criteria for the ICC.

Webpage describing current and past versions of the International Energy Conservation Code (IECC), establishing a baseline for energy efficiency with performance standards for building envelopes, mechanical systems, lighting systems and service water heating systems in homes and commercial...

Webpage with all versions of the International Fire Code (IFC), code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials...

Website with all versions of the International Plumbing Code (IPC), code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Webpage providing the latest versions of the International Wildland-Urban Interface Code (IWUIC), code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides...

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article describing walls and moisture development on them.

Article from University of Arizona on keeping homes cool during extreme heat, both personal and system changes.

Information sheet providing links and resources for insulating basements in cold climates.

Article discussing the downside to recessed can lights.

Website providing information about Knauf Insulation.

Federal Trade Commission (FTC) Regulation 16 CFR Part 460: Federal regulation on labeling of home insulation products.

Website describing the wildland-urban interface code and providing links to resources.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Website describing the EPA Lead Renovation, Repair, and Painting Rule that establishes requirements to reduce lead exposure for firms and individuals performing renovations that might disturb painted surfaces in buildings and homes built pre 1978 that might be occupied by children.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report about a two-year study intended to document the energy performance of a house in each sub-metered area and compare the performance to modeled predictions and to assess the thermal comfort performance of the single point mini-split heat pump.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Siding installation guide for Ply Gem Siding Group products.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Document describing good practices for insulating basements in new and existing homes.

Project discussing buried or encapsulated ducts and their pros and cons.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Document providing information on basement insulation, air sealing and water management retrofits.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Document covering the technical aspects of buried and insulated ducts (BEDs), as well as the advantages, disadvantages, and risks of BEDs compared to alternative strategies.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

Website providing medical information about malignant mesothelioma, a cancer related to asbestos exposure.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

Webpage for the CEC’s Modern Appliance Efficiency Database System