Library

Manual describing energy efficient building, design, and marketing strategies for Florida home builders.

Homepage for NREL research, support, and deployment information for the safety and health of workers, visitors, the public, the environment, and laboratory assets.

Handbook to help property owners understand the rules, procedures, standards, and criteria that apply to the environmental resource permit (ERP) program under Part IV of Chapter 373 of the Florida Statutes.

Section 608 establishes EPA’s National Recycling and Emission Reduction Program designed to reduce emissions related to maintaining, servicing, repairing, and disposing of air conditioning or refrigeration equipment.

Report describing a research study of the performance of interior low-E storm windows in two test houses at Pacific Northwest National Laboratory in Richland, WA.

Report describing a research study into the performance of Low-E storm windows installed in two test homes at Pacific Northwest National Laboratory in Washington state.

Case study on exhaust ventilation and corresponding outdoor air intake strategies implemented in high-performance new-construction multifamily buildings.

U.S. Code describing excess flow valve installation requirements.

Article containing background knowledge on expansion tanks.

Article explaining common myths about expansion tanks and proper facts.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Webpage developed by OSHA to provide workers and employers useful, up-to-date information on fall protection.

Website of the Federal Emergency Management Agency

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Document discussing methods to bioengineer stabilization of shorelines using living and non-living plant materials in combination, known as the “Living Shorelines” concept.

Factsheet describing the flood-resistant provisions of the 2021 International Codes and American Society of Civil Engineers (ASCE) 24-14, Flood Resistant Design and Construction, that are “higher standards” and that are more specific than the National Flood Insurance Program (NFIP) requirements.

Fact sheet discussing safe room and storm shelter door assemblies along with ICC® 500 compliance.

Technical bulletin describing a set of standards for building materials able to withstand flood waters as needed with wet floodproofing.

Guide discussing the siting of residential and community safe rooms at appropriate elevations and locations.

Fact sheet discussing designs for prefabricated safe rooms built to ICC 500 standards mentioned in FEMA P-361.

A website providing information on funding for mitigation programs to reduce disaster losses under FEMA's Hazard Mitigation Grant Program.

ICC 500 provides the minimum requirements to safeguard public health, safety, and general welfare relative to the design, construction, and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Webpage containing the most recent links for FEMA P-361, FEMA P-320, and other documents produced by FEMA regarding the construction of safe rooms for emergencies.

FEMA guidance for flood damage in areas prone to flooding.

A report showing what happens when windows break as a result of temperature differences between the inside and outside of the home, as well as code standards for the State of California regarding window exposure to wildfires.

Updated wildfire risk assessment, community impacts, and building science measures following the disastrous 2020 wildfire season in the western U.S.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Link to all versions of ASCE/SEI 24, a standard describing the minimum requirements and expected performance for the siting and design and construction of buildings and structures in flood hazard areas that are subject to building code requirements.

Webpage containing links to all editions of the Florida Building Code.

Presentation explaining the fenestration elements of the Florida Building Code.

Article describing the history and the current debate about how to adjust the Florida building codes.

Fact sheet describing foundation design criteria, foundation types suitable for coastal environments, and addressing foundations for high-elevation coastal areas (e.g., bluff areas); also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Website providing certifications and codes for automatic gas shut off valves in the state of California.

Standard that applies to storage water heaters, instantaneous water heaters, and circulating water heaters including booster water heaters; the current version of this standard was published in the year 2019 and it is available for purchase along with a digital preview on the ANSI webstore page.

Article describing EV charging, charger features, and other considerations for picking and installing EV chargers.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Standard describing GREENGUARD Emission Criteria for use with GREENGUARD Certification Program for Low Emitting Products.

Website article touring areas hit hardest by tornadoes to see how they are building differently to protect against the next big twister.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

Guidance for achieving safe and healthy indoor environments during home energy retrofits.

Report describing the advantages and best practices for installing heat pump water heaters (HPWH), highlighting their improved energy efficiency, reliability, and critical considerations such as condensate management, proper sizing, and optimal installation location to enhance performance and...

Webpage describing federal regulation related to excess flow valves on residential natural gas lines.

Website describing ways to prevent home house fires.

Website providing certified rating programs to help manufacturers, builders, contractors and homeowners compare performance of ventilation products for air flow, sound, and other performance characteristics.

Fact sheet describing the function of housewrap, its attributes, and common problems associated with its use, including housewrap vs. building paper and housewrap installation; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”