Library

Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

A guidebook helping builders in hot-humid climates design and construct homes for energy efficiency, durability, health, safety, and comfort.

Specifications for water heating systems designed to advance higher performing electric and gas heat pump water heaters.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Webinar answering code-related questions on duct leakage tests, moisture levels in attics and crawlspaces, combustion equipment in conditioned attics, ventilation in multifamily buildings, and continuous insulation in residential construction.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report describing combined space- and water-heating (combi) systems using a high-efficiency direct-vent burner.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Report describing the analytical study of renewable energy retrofits to homes built before 1980 and whether it is cost efficient or not.

Fact sheet poster describing benefits and qualification of U.S. Department of Energy (DOE) certified Zero Energy Ready Homes and providing eight examples of certified homes.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

DOE-sponsored report describing a study investigating condensation buildup on windows when using insulating shades.

Expert meeting describing meeting details for recommendations for applying water heaters in combination space and domestic water heating systems.

Report on field monitoring of inverter-driven ASHPs in cold-climate homes.

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

Report describing the significant potential for energy use reductions through heat pump water heaters, which have been a crucial part of Northwest power plans for decades and have recently achieved substantial savings with new integrated models and climate specifications.

Fact sheet describing the function of housewrap, its attributes, and common problems associated with its use, including housewrap vs. building paper and housewrap installation; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing the objective evaluation of space conditioning interactions between heat pump water heaters and home heating systems during winter 2016-2017, revealing a smaller than anticipated impact on space conditioning loads.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.

Document providing supplemental information for code enforcement professionals about headers in nonbearing walls.

Report documenting actual energy savings of a retrofit project in Boulder, CO.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Webpage describing a DOE Cold Climate Heat Pump Challenge. The challenge engages industry partners and focuses around the Cold Climate Heat Pumps, a more environmental and efficient heating alternative to traditional heating.

DOE report characterizing the installed base of windows and window coverings, and how users operate window coverings in order to enable precise quantification of energy savings.

Fact sheet poster describing a DOE tool that walks homeowners through a series of simple questions to produce a list of retrofit recommendations to improve the energy efficiency, indoor air quality, and durability of the homeowners’ home, while also lowering their carbon footprint.

Research study describing research underway to better understand building thermal energy modeling tools.

Presentation report detailing Heat Pump Water Heater (HPWH) interaction with space conditioning systems in real-life test scenarios that explains some of the problems arising from these interaction and information that can be used to make the system more efficient.

Fact sheet describing the requirements for EPA WaterSense certified kitchen faucets that highlights flow rate specifications, efficiency code standards, local requirements, faucet types and regulations for building and verifying a labeled faucet to ensure it meets the quality and water management...