Library

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.

Checklist for verifying FORTIFIED levels and documentation needed.

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Standards criteria supporting ICC HVAC duct support standards.

Publication specifying HVI’s prescriptive procedures for testing and rating airflow of residential ventilation products in accordance with ANSI consensus standards.

Publication describing the requirements and procedures for the certified performance ratings program for residential ventilation products administered by the Home Ventilating Institute.

Website providing an online directory of more than 3,600 residential ventilation products lisiting flowrates, sones, watts, and other performance metrics; all listed products have been tested by the Home Ventilating Institute.

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Report summarizing approaches to addressing duct leakage in hot humid climates.

Standard supporting indoor air quality performance by producers, purchasers and policy makers to improve the environmental performance of products and services.

Document outlining specifications that were developed by the U.S. Environmental Protection Agency (EPA) to recognize new homes equipped with a comprehensive set of indoor air quality (IAQ) features.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

Webpage providing all versions of the International Building Code (IBC) which is code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to...

List of acceptance criteria for the ICC.

Webpage describing current and past versions of the International Energy Conservation Code (IECC), establishing a baseline for energy efficiency with performance standards for building envelopes, mechanical systems, lighting systems and service water heating systems in homes and commercial...

Webpage with all versions of the International Fire Code (IFC), code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials...

Website with all versions of the International Plumbing Code (IPC), code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Webpage providing the latest versions of the International Wildland-Urban Interface Code (IWUIC), code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides...

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Federal Trade Commission (FTC) Regulation 16 CFR Part 460: Federal regulation on labeling of home insulation products.

Report presenting lab evaluation of five heat pump water heaters available in the US market today.

Report proposing mini-split heat pumps as a new retrofit option to replace resistance heating in the Pacific Northwest.

Website describing the wildland-urban interface code and providing links to resources.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Website describing the EPA Lead Renovation, Repair, and Painting Rule that establishes requirements to reduce lead exposure for firms and individuals performing renovations that might disturb painted surfaces in buildings and homes built pre 1978 that might be occupied by children.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report on the long-term performance of mini-split heat pumps.

Document presenting a cost effective method that was used by four builders in the Gainesville, FL area to construct interior ducts in over a dozen site built homes.

Report identifying the target market for solar water heaters and potential pathways and cost/performance targets that must be met for these systems to realize large energy savings.

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Document pertaining to design and application guidance for combination space and tankless domestic hot water heating systems used in residential buildings, based on field evaluation, testing, and industry meetings.

Document intended for designers and installers of hydronic heating systems interested in maximizing the overall system efficiency of condensing boilers when coupled with baseboard convectors. It is applicable to new and retrofit projects.

Document with evaluation of 14 heat pump water heaters (including three recently released HPWH products) installed in existing homes in the northeast region of the United States.

Report providing guidance on how to implement a compact duct system inside a plenum truss bulkhead of a one-story, slab-on-grade home.

Report describing recommendations for optimizing flexible duct, constant-volume HVAC systems using junction boxes.

Document covering the technical aspects of buried and insulated ducts (BEDs), as well as the advantages, disadvantages, and risks of BEDs compared to alternative strategies.

Report describing the sealing and insulating of HVAC duct systems in existing homes.

Document illustrating guidelines for efficient installation of interior duct systems in new housing.

Document developed to help residential builders and retrofitters transition from tank-type water heaters to tankless water heaters.

Research study analyzing measured energy savings from a moderate retrofit by comparing post-retrofit performance with measured pre-retrofit monitored data.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

Webpage for the CEC’s Modern Appliance Efficiency Database System

List of appliance brands and models, showing their performance and efficiency as tested by the appropriate standard.