Library

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Presentation on urban land use and sustainable building design.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Article about installing balanced ventilation systems.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

Information sheet about types and installation of insulation.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Webpage for the United States Geological Survey for the Department of the Interior.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

Interactive map maintained by the USDA showing plant hardiness zones throughout the U.S.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Report describing the formation of icicles and ice dams along poorly ventilated roofs and how to mitigate ventilation issues with insulation and vents.

Information sheet about proper ventilation and air sealing.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2013, and is available for...

This report examines indoor air quality in post-2013 homes across various climates, focusing on contaminant levels, ventilation equipment usage, and control measure impact, with regional data from Florida, Georgia, and South Carolina.

ENERGY STAR overview on certified ventilation fans.

Standard that provides procedures and methods for meeting minimum ventilation and indoor air quality requirements to engineers, design professionals, owners, and jurisdictional authorities where model codes have been adopted. This is the current version of the standard, which was published in the...

Report describing the use of attic ventilation to control moisture in cathedral roofs and avoid the formation of ice dams.

Fact sheet describing how to identify heat-related illness and what actions to take.

Report describing a field study of 31 homes to test envelope and duct leakage and fan flowrates, and to determine ventilation operation characteristics.

An overview of impacts from weather, climate, and water extremes globally from 1970 to 2019 based on disaster data from the Emergency Events Database (EM-DAT)

Fact sheet describing how weatherstripping can be an easy and cost-effective way to save money on energy costs and improve comfort by reducing drafts.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

EPA coronavirus Q&A discussing the role of HVAC filters in dealing with COVID-19.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Brochure about how to install and use a whole-house fan.

Report summarizing results from a case study about whole-house mechanical ventilation systems in Chicago.

Webpage from USDA and U.S. Forest Service with a map of potential wildfire risk across the U.S.

A website created by the U.S. Forest Service, containing interactive maps, charts and resources to help communities explore their risk to wildfires.

Article describing the impacts of wildfire smoke on indoor air quality and some ways ASHRAE is responding.

ENERGY STAR website to find the best windows by selecting your state and county (or zip code in California) to find your climate zone and learn more about picking the best product for your area.

Article describing sustainable community development of near zero energy homes in Greenfield, Massachusetts.

Report and case study describing a retrofit project for single family homes in the Pacific Northwest.