Library

Article describing methods for designing and constructing multifamily buildings with insulating concrete forms (ICFs).

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Webpage describing benefits of adding battery storage to homes and an estimation tool.

Blog article citing the risks and downsides of attic ventilation fans from a building science perspective.

Web page describing how to identify heat-related illness and how to prevent it.

Webpage from Boston Solar describing how solar plus storage options can be beneficial for maintaining electricity during power outages.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

This paper discusses model validation using data from three thermosiphon systems.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

A website issuing watches, warnings, forecasts, and analyses of hazardous tropical weather and increasing the understanding of hazards.

Building science insight into crawlspaces.

Webpage presenting updated maps for annual average temperature and precipitation in the contiguous U.S.

A document providing guidance on integrating a PV array with a roof system.

Website providing comparison charts and reviews of off-grid inverters for solar power systems.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Webpage providing guidance for homeowners on how much snow weight a typical roof can handle and when to consider removing snow from the roof.

Report aiming to "de-mystify" technology and economic considerations of residential PV systems.

Website estimating energy production and cost of energy of grid-connected photovoltaic (PV) energy systems throughout the world.

Searchable database of over 3,000 roofing products that have undergone solar reflectance and thermal emittance testing.

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

Report providing recommended designs and guidance for rebuilding homes destroyed by hurricanes in the Gulf Coast.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

Article describing moisture and ice dam issues in attics and how to air seal the attic floor.

Data tables on U.S. renewable energy consumption and general trends in the market for renewable energy.

The RERH specifications and checklists take a builder and a project design team through the steps of assessing a home’s solar resource potential and defining the minimum structural and system components needed to support a solar energy system.

Website tool intended to guide home builders in assessing whether a new home has the proper physical orientation to support a future installation of a solar energy system.

Research study identifying the best performing, most energy-efficient and cost- effective techniques to provide controlled mechanical ventilation and humidity control in hot- humid climates with thermally efficient building envelopes.

Brochure with information on residential solar hot water systems.

Brochure detailing the guidelines, recommendations, and preferences of the City of Burnsville for citizens installing solar photovoltaics.

DOE report characterizing the installed base of windows and window coverings, and how users operate window coverings in order to enable precise quantification of energy savings.

Report on air-sealing programs for energy-efficiency retrofits.

Information sheet describing solar PV upgrade for an existing homes.

Document discussing changes in testing the annual performance ratings for solar water heaters.

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Recovery advisory guide providing guidance on existing code requirements as well as recommend best practices for attachment design, installation, and maintenance of rooftop solar panels to increase panel wind resistance in the U.S. Virgin Islands after Hurricane Maria.

Webpage discussing the characteristics of sunlight and how cool roofs work to reduce solar heat gain.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Web page describing the basics of how to size and build a battery bank for electricity storage.

Paper describing the development and testing of an affordable net-zero energy house in Lenoir City, Tennessee.

Webpage providing information about design snow loads and a free interactive ground snow load mapping tool for the contiguous United States, as well as snow load calculation methods.

Website article describing the way solar panels are coupled to AC and DC battery energy storage systems.

Report providing a synopsis of a project to evaluate the performance of a roof-integrated solar water heating system.

SEIA resources page.

Tool determining the most economical and efficient photovoltaic array location and position.

Guidelines to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.