Library

Report providing recommended designs and guidance for rebuilding homes destroyed by hurricanes in the Gulf Coast.

Webpage explaining how to mitigate heat loss through roofs for ice dam prevention.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

An EPA guide describing the causes and impacts of summertime urban heat islands, promoting strategies for lowering temperatures in U.S. communities.

Article describing moisture and ice dam issues in attics and how to air seal the attic floor.

Webpage from FEMA describing how to properly reconstruct masonry fireplace chimneys damages by earthquakes.

Research study identifying the best performing, most energy-efficient and cost- effective techniques to provide controlled mechanical ventilation and humidity control in hot- humid climates with thermally efficient building envelopes.

Report providing architects, designers, and homeowners with information to make house plans useful for constructing a more wind resilient structure.

Fact sheet describing how to install bracing to retrofit roof dormers for increased wind resistance.

Factsheet providing homeowners with an overview of approaches for flashing and sealing roof penetrations to help discussion with a roofing contractor.

Fact sheet describing flashing of roof penetrations to make a home more resistant to high winds, hurricanes, and rainwater intrusion.

Report on air-sealing programs for energy-efficiency retrofits.

Report covering non-combustible continuous exterior insulation and non-combustible roof venting.

Fact sheet describing proper roof sheathing installation and illustrating fastening methods that will enhance the durability of a building in high-wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing recommended practices for the use of roofing underlayment as an enhanced secondary water barrier in coastal environments and optional installation methods; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Fact sheet describing the importance of proper roof and deck flashing, and typical and enhanced flashing techniques for coastal homes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Webpage discussing the characteristics of sunlight and how cool roofs work to reduce solar heat gain.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Report informing building stakeholders about the risks a snow event poses to their buildings, preventative measures to take before the snow season, and actions that should be taken before, during, and after a snow event.

Webpage providing information about design snow loads and a free interactive ground snow load mapping tool for the contiguous United States, as well as snow load calculation methods.

Specifications to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

Spreadsheet tool that computes solar reflectance index (SRI) and roof surface temperature based on solar reflectance and thermal emittance using ASTM standard E 1980.

A website providing timely and accurate forecasts and watches for severe thunderstorms and tornadoes over the contiguous United States.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Research study making several recommendations to whole-home program designers and implementers for improving the cost effectiveness and reach of whole-home programs.

Fact sheet describing water management in a residential building.

Fact sheet describing the test procedure for wind and wind driven rain resistance of discontinuous roofing systems.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.

Manuals describing design, materials, and installation techniques applicable to almost all types of roof systems; four-volume set includes Metal Panel and SPF Roof Systems, Membrane Roof Systems, Architectural Metal Flashing and Condensation and Air Leakage Control, and Steep-Slope Roof Systems.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Fact sheet outlining best design and construction practices for tile roofing in high wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Information sheet about types and installation of insulation.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Webpage for the United States Geological Survey for the Department of the Interior.

Webpage from Southern California Earthquake Center (SCEC) on identifying key problem spots on unreinforced masonry chimneys and how to retrofit them to withstand seismic forces.

Report reviewing unvented roof assemblies, such as conditioned attics and unvented cathedral ceilings that are becoming common in North American construction.

Document summarizing the various papers on unvented conditioned cathedralized attics found on BSC's website.

Report covering wind uplift and roofing membrane failures.

Interactive map maintained by the USDA showing plant hardiness zones throughout the U.S.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Webpage describing the use of cool roofs to reduce heat islands and and benefits and costs.

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.