Library

Animated video demonstrating the continuous load path of a hurricane on a house.

Calculator determining the appropriate design pressures for steep-slope roof coverings for roofers and evlauators.

Fact sheet describing the acceptable underlayment alternatives including ASTM D6757 Underlayment Felt Containing Inorganic Fibers for Steep-Slope Roofing for certain applications.

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Checklist highlighting the requirement for metal structural connections and materials fasteners used to retrofit or construct FORTIFIED buildings less than 3,000 ft from saltwater to be suitably protected from corrosion.

Checklist intending to clarify FORTIFIED Home™ eligibility requirements that relate to a home’s foundation.

Checklist providing specific information about the type of residential building eligible for designation consideration in the FORTIFIED Home program.

Factsheet describing ways to install sheathing over existing 1x roof decking.

Checklist providing prescriptive instructions on how to retrofit ladder framing on gable end overhangs to achieve a maximum depth of 18 in. from the face of the wall.

Checklist describing requirements for roof sheathing along the gable end truss or rafter to achive a FORTIFIED Roof, including New Roof designations and exceptions.

Factsheet describing garage door pressure rating requirements in high wind– prone areas.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.

Website providing resources for roofers to construct high-wind, hurricane, and hail-resistant roofs from IBHS Fortified program.

Checklist providing information on how and when to install solid sheathing over spaced deck boards on homes located in areas that use the FORTIFIED Home™–High Wind standards.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.

Fact sheet instructing installers about flashing installed on a FORTIFIED roof and points to roof covering manufacturers for flashing installation instructions.

Checklist providing the type of roofing felt recommended by IBHS as a quilified sealed roof deck system for asphalt shingle or metal roofing.

Checklist providing options and a guide for taping roof deck seams.

Checklist providing information on strengthening the attachment of roof sheathing and installation of a sealed roof deck system using a spray polyurethane foam adhesive.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

Report analyzing the effect of global climate change on national interests, and providing climate predictions.

A builder's guide describing hurricane-resistant reinforcements for gable ends.

Guide describing how and where to install flashings in order to weatherproof a roof.

Article describing issues with attic ventilation fans and why the state of Georgia residential code does not allow plug-in attic ventilation fans.

Document describing amendments to IECC 2015 to create the Georgia State Minimum Standard Energy Code.

Website with prepopulated information about the United States renewable resources.

A website providing free access to a variety of U.S. and international maps.

Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

Report identifying Building America and 2021 International Energy Conservation Code climate zone designations for every county in the United States; where a county's climate zone designation has changed since the 2018 IECC, that change is indicated as well.

IRC guide referencing wood truss bracing best practices and requirements.

Report describing tsunamis and options for vertical evacuation from tsunamis; the guide addresses determination of tsunami and earthquake loads and structural design criteria and concepts, primarily for commercial buildings.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

Report presenting seismic design and construction guidance for one- and two-family houses for homebuilders, knowledgeable homeowners, and other non-engineers.

Report documenting short-term test results of the Shift House and compares the results of Passive House Planning Package and Building Energy Optimization modeling of the project.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

A report describing how to build a high-performance affordable house to achieve 30% whole house energy savings in the mixed-humid climate region.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Factsheet describing proper methods for installing vinyl siding and soffit coverings in high wind and coastal areas.

Factsheet describing tips for building or renovating with a focus on disaster resistance.

Report by the FEMA Mitigation Assessment Team on damages due to Hurricane Irma which struck Florida in September 2017, and recommendations for construction for future disaster resistance and preparedness.

Article presenting the 2008 update on the 2006 details on when required hurricane mitigation retrofits are required and the cost cap on required hurricane mitigation retrofits.

Code describing the requirements for existing site-built single-family homes to receive roof-to-wall retrofits when re-roofing.

Webpage containing a library of ready-to-use social media posts, graphics and video links that promote life-saving information about how individuals and families can prepare for and survive during a hurricane.