Library

Website with consumer information about duct cleaning.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Webpage providing information about design snow loads and a free interactive ground snow load mapping tool for the contiguous United States, as well as snow load calculation methods.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Information sheet about buried ducts.

A website providing timely and accurate forecasts and watches for severe thunderstorms and tornadoes over the contiguous United States.

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Document covering the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Report describing findings from research related to heating, ventilation, and air conditioning (HVAC) companies that have made the decision to transition to whole house performance contracting (WHPC).

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Research study making several recommendations to whole-home program designers and implementers for improving the cost effectiveness and reach of whole-home programs.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Information sheet describing transfer ducts and grilles for HVAC.

Information sheet about types and installation of insulation.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Webpage for the United States Geological Survey for the Department of the Interior.

Interactive map maintained by the USDA showing plant hardiness zones throughout the U.S.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Research study comparing TRNSYS Type 604 pipe model against laboratory pipe heat loss test data and detailed field monitoring data.

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.

Information sheet about proper ventilation and air sealing.

Guide providing information on controlling attic ductwork sweating.

Fact sheet describing how to identify heat-related illness and what actions to take.

An overview of impacts from weather, climate, and water extremes globally from 1970 to 2019 based on disaster data from the Emergency Events Database (EM-DAT)

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Webpage from USDA and U.S. Forest Service with a map of potential wildfire risk across the U.S.

A website created by the U.S. Forest Service, containing interactive maps, charts and resources to help communities explore their risk to wildfires.

ENERGY STAR website to find the best windows by selecting your state and county (or zip code in California) to find your climate zone and learn more about picking the best product for your area.

Report describing the design and construction of a highly energy efficient community of ten duplexes in Greenfield, Massachusetts.

Report and case study describing a retrofit project for single family homes in the Pacific Northwest.