BASC Search

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Fact sheet describing improvements in the earthquake resistance of residential and commercial new construction through the adoption into the International Residential Code of seismic provisions including those developed by the National Earthquake Hazards Reduction Program (NEHRP).

Document providing specifications (including the definition of a consistent reference building for new construction, assumptions and methods for analyzing retrofits of existing buildings) to facilitate accurate and consistent analysis of new and existing, single-family and multifamily, buildings...

Bill requiring the Consumer Product Safety Commission to revise the safety standards for freestanding clothing storage units such as a dressers, bureaus, or chests of drawers to include testing related to tip overs and new warning requirements for all such products entering the U.S. market; passed...

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Book describing Carpentry and Construction, Construction Materials, Hand Tools, Power Tools, Construction Equipment, Jobsite Safety, and Working Conditions, Building Design and Print reading, Inspections Survey Instruments and Operations, Foundation and Outdoor Slab Construction, Floor, Wall, and...

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Report describing a laboratory assessment that provides insights into space requirements and venting strategies for heat pump water heaters (HPWH) to enhance retrofit installations and provide actionable guidance for manufacturers, designers, engineers, installers, and owners.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

California Office of the State Fire Marshal's homepage for the Building Materials Listing Program, providing builders, contractors, architects, and others with access to a database of fire alarm systems and fire-resistant construction materials including roof coverings, wall, ceiling, and floor...

Fact sheet describing guidance concerning lot selection and building siting considerations for coastal residential buildings, including factors that constrain siting decisions, coastal setback lines, common siting problems, and suggestions for builders, designers, and owners; also published in FEMA...

Fact sheet describing an alternative to piles in V Zones and A Zones in coastal areas where soil properties preclude pile installation, but the need for an “open foundation system” still exists and recommendations for good masonry practices in coastal environments; also published in FEMA P-499 “Home...

Report detailing field walk-through evaluations, energy simulations for projected savings with exterior insulation upgrades, building envelope energy improvement cost estimates, and installation and maintenance of monitoring equipment and data.

Fact sheet describing the requirements for EPA WaterSense certified clothes washers that highlights the integrated water factor, integrated modified energy factor, top-loading vs. front-loading specifications, efficiency code standards, local requirements, faucet types and regulations for building...

Report describing a project whose goal was to determine the prevalence of residential comfort system faults with a focus on air conditioners and heat pumps, and on key faults that can occur during installation: (1) incorrect refrigerant charge level (undercharge or overcharge); (2) indoor coil...

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

2018 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

2015 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

2012 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Fact sheet providing guidance on alternative building materials and techniques in coastal environments, including Engineered Wood Products, SIPs, ICFs, Prefabricated Shear Walls and Moment Frames, Sprayed Closed-Cell Foam Insulation, Advanced Wall Framing, and Modular Houses; also published in FEMA...

Fact sheet describing effects of planning, siting, and design decisions on coastal home costs, including initial, operating, and long-term costs; risk determination; and the effect on costs of meeting and exceeding code and NFIP design and construction requirements; also published in FEMA P-499...

Research study outlining savings from reducing air infiltration, with and without the addition of mechanical ventilation, using two identical laboratory homes designed to model existing Florida building stock.

2021 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Document presenting the minimum recommended requirements necessary for the design and construction of new buildings and other structures to resist earthquake ground motions throughout the United States.

Report describing a field study of 31 homes to test envelope and duct leakage and fan flowrates, and to determine ventilation operation characteristics.