Library

Web article describing common issues that can cause refrigerant system flare joints to leak.

2015 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

Report summarizing the wind-resistant provisions of the 2015 edition of the International Building Code.

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2018 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2018 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2018 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2018 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2018 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2018 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2018 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

2018 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Building code for the state of California providing the building rules and regulations as well as disaster resistance tools.

2019 version of the California Residential Code.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2021 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

2021 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2021 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2021 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2021 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2021 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2021 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2021 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

2021 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

State building code containing general building design and construction requirements relating to fire and life safety, structural safety, energy efficiency, and access compliance; based on the 2021 International Building Code.

Document intended to help owners, designers, builders, inspectors, examiners, and energy consultants comply with and enforce California’s energy efficiency standards for low-rise residential buildings (also known as Title 24).

Performance rating standards for unitary air-conditioners and unitary air-source heat pumps, including definitions, classifications, testing, rating, and operating requirements, as well as minimum data requirements for published ratings and markings.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2023 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

State specialty code requiring energy efficiency measures in residential buildings.

Report assessing building codes for the 18 Atlantic and Gulf coast states which are most prone to hurricanes, as of 2018.

Webpage providing guidance on the 45L tax credit, assembling the most relevant information for Northwest builders to maximize their tax credit and build energy efficient homes.

Factsheet describing how the U.S. DOE's Zero Energy Ready Home program has evolved since 2013. This factsheet includes case studies, statistics about the program and specific building components, and a general outline of program requirements.

Article describing utility rates, net metering policies, installation costs, financial incentives, and other info for both consumers who are interested in installing renewable energy systems and for energy justice and clean energy advocates.

Guidance document from the UN environment programme on climate-resilient buildings and communities practices, including guidance on heat waves, drought, hurricanes, and flooding.

Standard outlining materials and installation methods by using commercial building wraps.

Website article comparing DC and AC batteries and explaining that DC batteries have black start ability to restart from solar power while providing AC batteries need grid power to restart if fully discharged.

Website article describing the advantages and disadvantages of AC and DC battery energy storage systems and inverters for solar power systems.

Website homepage for the Air Conditioning Contractors of America (ACCA).

Webpage listing ACCA Manual J and D calculation software that is approved by ACCA.

Report providing product manufacturers, fabricators, contractors and installers, design professionals, owners, and real estate developers with technical performance and cost guidance for scalable zero-carbon-aligned new construction pathways and retrofit packages to achieve zero carbon retrofits and...

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Factsheet describing the motivation for adopting the 2021 International Energy Conservation Code and how the 2021 IECC Assemblies Tool developed by PNNL can be used to find IECC compliant whole-house assembly drawings.

Factsheet describing the challenges faced when achieving high-performance multifamily homes.

Factsheet describing how window shades can keep out unwanted heat, detailing the most effective products and practices.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

The research report outlines a practical and cost-effective strategy utilizing central HVAC systems to optimize humidity control and ventilation in energy-efficient homes located in hot-humid climates, demonstrating significant improvements without requiring complex equipment upgrades.

Voluntary specification for residential, commercial/multifamily, and industrial water heaters and heating systems.

Report examining the effectiveness of an aerosolized acrylic technique for air sealing existing homes to reduce air leakage and improve energy efficiency.