Library

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Report on adding insulation to load-bearing mass masonry buildings.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Webinar answering code-related questions on duct leakage tests, moisture levels in attics and crawlspaces, combustion equipment in conditioned attics, ventilation in multifamily buildings, and continuous insulation in residential construction.

Report presenting the building america research to market plan.

Document presenting some of the key technical properties of many of the most common building materials.

Case study about the grid integration of electrical vehicle supply equipment.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Report on improving passive design adoption rates.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Report on experiments comparing the cooling and heating seasonal and peak demand performance of different variable-capacity air conditioning and heat pump units.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Report on field monitoring of inverter-driven ASHPs in cold-climate homes.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Report describing the significant potential for energy use reductions through heat pump water heaters, which have been a crucial part of Northwest power plans for decades and have recently achieved substantial savings with new integrated models and climate specifications.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report assessing slab-on-grade foundation insulation energy savings.

Report on on lessons learned from building one multifamily home to the Zero Energy Ready Home program requirements.

Report examining the impacts that common installation practices and age- induced equipment degradation may have on the installed performance of natural gas furnaces, as measured by steady-state efficiency and AFUE.

Report describing the objective evaluation of space conditioning interactions between heat pump water heaters and home heating systems during winter 2016-2017, revealing a smaller than anticipated impact on space conditioning loads.

Report on the long-term performance of mini-split heat pumps.

Report on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation and living space floor assembly at fifteen home.

Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

Report describing the most cost-effective ventilation and indoor air quality solutions for multifamily homes that meet ASHRAE 62.2-2016.

Report on a study monitoring moisture conditions of double-stud wall assemblies with different insulation in Devens, Massachusetts.

Study in which a central heat pump water heater system was monitored in detail and used to create a model for assessing similar systems in various climates.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Report covering the reconstruction of flood damaged homes.