Library

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Manual assisting architects, engineers, owners and roofing contractors for designing, specifying and installing roof tiles in areas of snow and ice.

Installation manual outlining proper installation practices, industry standards and the code requirements of roofing tiles.

Article describing construction best practices to help reduce the wind-induced pressure loads on a low-rise building during a hurricane.

Brochure helping homeowners identify hazards, work with contractors to remove the hazards, help ensure the work is done properly, and educate when they can return safely to the home.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Report on experiments comparing the cooling and heating seasonal and peak demand performance of different variable-capacity air conditioning and heat pump units.

Report describing costs associated with non-residential electric vehicle charging, including multifamily properties.

Fact sheet describing guidance for choosing appropriate materials and using proper construction practices when rebuilding, repairing, or renovating a home to increase its resistance to fires.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Conference paper describing the use of engineered rainscreen products to provide air flow and water drainage space in wall assemblies in residential and commercial buildings.

Guide about designing and installing closed crawlspaces.

Report providing information on ways to incentivize funding of hazard mitigation programs.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

Fact sheet describing drip irrigation for landscaping.

Designer checklist covering hazards involving ground and surface water, rain and water vapor, HVAC and plumbing, sunlight, insects, decay, and natural hazards, and builder checklist covering all disaster resistance, sorted by building component.

Report on how airtighness changes as houses age.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Standard providing minimum functionality requirements for earthquake-actuated automatic gas shutoff devices; applicable to systems carrying natural gas and propane, the devices are used in piping, equipment, and appliances typically found in structures of three stories or less.

Bulletin describing the components of ECM motors and comparing their efficiency with PSC motors.

A map describing the average temperature of shallow groundwater in Fahrenheit across the continental United States.

Technical report evaluating the effects of heat pump water heaters on heating and cooling energy usage in laboratory homes.

Article presenting a numerical study of wind pressure on the low-rise hip-roof building by varying the roof pitch using computational fluid dynamics computer modeling and wind tunnel testing of hip roofs with different roof pitches: 15°, 20°, 30° and 40°.

Report describing best practices for installing electric vehicle chargers.

A San Diego County standard highlighting the requirements for residential emergency vehicle turnarounds.

Powerpoint on attic ventilation developed as training material for the Weatherization Assistance Program.

Technical report evaluating the energy savings potential of radiative cooling technologies, particularly photonic 'selective emittance' materials.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Program criteria for residential exhaust fans used for ventilation.

Report describing the research gap in the connection between resilience and energy efficiency.

DOE-sponsored report describing the experimental setup and results of field studies on using interior cellular shading attachments to reduce solar heat gain in summer and reduce heat loss in winter.

Report describing the methods and results of a field evaluation of the energy performance of cellular shade window coverings.

Report describing a research study of the performance of interior low-E storm windows in two test houses at Pacific Northwest National Laboratory in Richland, WA.

Technical report presenting the results of an evaluation of homes using high-efficiency mini-split heat pumps to supplement the primary heating and cooling systems.

Article describing benefits of ECM motors and how they can be installed as retrofit motors in HVAC equipment.

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Newsletter reviewing federal disaster policy, the research basis for resilience, and three models of building resilient communities.

Website providing links to scalable guidance and tools about the importance of earthquake mitiation to the private sector, its owners, managers, and employees.

Guide discussing the siting of residential and community safe rooms at appropriate elevations and locations.

ICC 500 provides the minimum requirements to safeguard public health, safety, and general welfare relative to the design, construction, and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.