Library

2012 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2012 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

Report describing practices and considerationsfor more efficient water use in pools, spas, and fountains.

Code describing energy codes for energy-conserving and compliant designs in Florida.

The purpose of this standard is to establish minimum requirements to safeguard the public health, safety and general welfare relative to the design, construction and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

2015 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Link to the most recent version of ACCA Manual D, a standard outlining industry procedure for sizing residential duct systems.

Link to the most recent version of ACCA Manual J, a standard for producing HVAC equipment sizing loads for single-family detached homes, small multi-unit structures, condominiums, townhouses, and manufactured home

Link to the most recent version of ACCA Manual S, a standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

This report describes research conducted to evaluate air transfer between the garage and living space in a single-family detached home constructed to the 2009 IECC by a production home builder in Maryland.

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

Website describing indoor air quality, and common indoor pollutants and how to reduce exposure to them.

Article describing technologies available for monitoring indoor air quality (IAQ).

Website describing archived program inforamtion for the Air Sensors International Conference, hosted by the University of California, Davis.

Research report describing study of interior and exterior air sealing techniques to stop ice dams in five 1.5-story retrofit homes conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Website describing electric vehicles, electric vehicle charging stations, and incentives for installing electric vehicle charging stations.

Regulatory Compliance Toolbox by the American Home Furnishings Alliance (AHFA) concerning health, safety, environmental, fashion and business information related to home furnishings.

Library describing ANSI-affiliated standards.

Report outlining workflow and results of regression models on monthly and daily utility data (meter readings of electricity consumption), outlining a process for screening and gathering useful results from inverse models.

Document describing recent discussions on indoor carbon dioxide (CO 2) levels.

This standard provides the minimum requirements for energy-efficient design of most sites and buildings, except low-rise residential buildings. It offers, in detail, the minimum energy efficiency requirements for design and construction of new sites and buildings and their systems, new portions of...

Articles describing attic and ceiling insulation, including mentions of baffles with protect insulation from wind washing.

Article describing bidirectinoal charging and energy storage methods using electric vehicles.

Information sheet about reservoir claddings.

Web report explaining how correct filter sizing is an issue that applies to all new and existing homes that use ducted HVAC systems.

Webpage providing the latest version of the California Plumbing Code.

Webpage containing the latest version of the California Residential Code.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Webpage describing how caulking is used, how to select the appropriate caulking, and how to apply caulking.

Factsheet describing how caulking is used, how to select the appropriate caulking, and how to apply caulking.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Webpage describing electric vehicle chargers

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Website describing technical expertise and support regarding electric vehicle infrastructure.

Report describing retrofitting options and methodology for architects, developers, and property owners to use when making decisions about retrofits for common building types in NY.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Consumer Product Safety Commission (CPSC) requirement for clothing storage units (CSUs) to be tested for stability, exceed minimum stability requirements, be marked and labeled with safety information, and bear a hang tag providing performance and technical data about the stability of the CSU.

Research report anayzing the results of a large retrofit project, turining an old school into near zero energy consumption apartments in Greenfield MA.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

This case study describes costs associated with the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Research study evaluating energy savings and cost effectiveness of installing low-emissivity (low-e) storm windows over existing windows in residential homes in all climate zones.

Report covering exterior energy retrofits of masonry buildings.

Guide describing design recommendations to ensure that electric vehicle charging stations comply with the Americans with Disabilities Act