Library

Document covering installation of high efficiency gas furnaces, including when to install a high efficiency gas furnace as a retrofit measure, how to identify and address risks, and steps to follow for the selection and installation process.

Document providing information on basement insulation, air sealing and water management retrofits.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Research study showing that for a relatively small investment, a variable speed pool pump can reduce pool pump energy use by 50% to 75%.

Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Document developed to help residential builders and retrofitters transition from tank-type water heaters to tankless water heaters.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Document providing information and guidance about rehabilitating, retrofitting, and replacing wood window assemblies in residential construction.

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

Report covering the selection of roof vents for rainwater resistance.

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

Book with indepth information about hydronic systems for residential and commercial buildings.

Report describing the work conducted for high performance hybrid assemblies.

Online course describing mold and mold remediation for environmental and public health professionals.

Online course providing an overview of mold prevention and mold remediation.

Research study examining the performance of existing multifamily ventilation central systems and explored alternative solutions in retrofit situations.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

Report detailing the proposed point structure for the prescriptive approach of the energy efficiency chapter of the NGBS update.

Report about a test home project evaluating strategies to elevate the performance of existing homes to a level commensurate with best-in-class implementation of high performance new construction homes.

Information sheet about the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Database compiling extended capacity data for numerous cold climate heat pump manufacturers and models.

Webpage outlining important considerations when remodeling, including for maintaining healthy air and keeping radon, dirt, and moisture out.

Report demonstrating cost-effective energy savings targets as well as improved comfort and indoor environmental quality associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort.

Document on the development of two simple in-home efficiency test methods that can be used by technicians, researchers, or interested homeowners to verify the correct operation and energy efficiency of a homes air conditioning and heating equipment.

Document about development of models for evaluating thermal performance of walls in existing homes that will improve the accuracy of building energy simulation tools when predicting potential energy savings of existing homes.

Document about development of a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Document about development of recommendations to help residential HVAC designers select optimal supply inlet size and system operating conditions to maintain good thermal comfort in low heating and cooling load homes.

Website to access Oregon state specialty code. Chapter 11 contains requirements concerning energy efficiency measures in residential buildings.

Report covering wind loading on roofing assemblies.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Technical report describing research aimed to provide window manufacturers with foundational guidance for installing windows in walls with continuous insulation (CI), addressing critical aspects such as evaluating common installation methods, establishing acceptance criteria for window performance...

Report providing detailed steps for builders, architects, and property managers to take for integrated pest management for control of a variety of pests including insects, rodents, and birds.

Document describing helpful information for hosts of public electric vehicle charging stations.

Report describing the key findings from the first third-party field validation of 120-volt heat pump water heater (HPWH) technology, addressing the significant barriers to their adoption and emphasizing their potential role in reducing carbon emissions from residential water heating.

Research study identifying best practices of three successful high performance, custom home builders in the upper Midwest.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

Database of approved products that meet the requirements of the High Velocity Hurricane Zone.

Report about seven pilot homes and development of guidelines for deep energy retrofits in cold climates.

Webpage describing how to elevate major appliances in case of a flood.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Searchable database of over 3,000 roofing products that have undergone solar reflectance and thermal emittance testing.

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

Technical report describing the Re-Side Right initiative by the New Jersey Institute of Technology's Building America research team that proposes enhancing home efficiency during the re-siding process by incorporating an insulating layer that acts as both an air barrier and water resistive barrier...

Field manual describing measures to reduce potential hazards and damages caused by and to nonstructural components of a building such as HVAC, appliances, lighting, windows, and furniture during an earthquake.

Fact sheet describing best practices in installing leak-free refrigerant systems, including specifics on creating flare joints and brazed joints, pressure testing, vacuum testing, and charging the system with refrigerant.

Data tables on U.S. renewable energy consumption and general trends in the market for renewable energy.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.