Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

2009 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

A guide about the above code residential home certification called Earth Advantage and required and optional measures available to meet the point requirements for certification.

2012 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2012 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Report describing practices and considerationsfor more efficient water use in pools, spas, and fountains.

Code describing energy codes for energy-conserving and compliant designs in Florida.

The purpose of this standard is to establish minimum requirements to safeguard the public health, safety and general welfare relative to the design, construction and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

2015 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

Article describing how to stop air leaks around the windows and doors of a home.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Fact sheet describing changes made to the 2010 Florida Building Code with regards to wind design loads and requirements.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Report describing retrofitting options and methodology for architects, developers, and property owners to use when making decisions about retrofits for common building types in NY.

Information sheet discussing the properties and benefits of insulating concrete forms.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

This case study describes costs associated with the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Report covering exterior energy retrofits of masonry buildings.

Website discusses differences between CFL and LED bulbs.

Online database with efficiency information about residential HVAC systems and commercial refrigeration equipment.

Poster describing earthquake safety tips and protection measures to take at home.

Article describing earthship homes.

This study evaluates the energy, humidity and indoor air quality implications of residential ventilation cooling in all US IECC climate zones.

Online reference containing general information about geothermal heat pumps.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

ENERGY STAR website providing information about programs, products and energy efficiency information.

Website providing consumer information about ceiling fans, including specifications and buying guidance.

ENERGY STAR specifications for residential window, door and skylights, Version 6, effective January 1, 2015.

Comprehensive design guide describing the benefits and details of retrofit methods for buildings and equipment in flood-prone areas. Estimated costs are outdated due to publication date.

Archived 2014 EPA newsroom release describing new EnergyStar standards for clothes dryers.

Broschure detailing water control strategies for building openings (e.g., vents and drainpipes).

Factsheet describing steps builders should take to reduce erosion and control sediment on construction sites during home construction.

Homebuilding’s simple payback estimator for an insulation upgrade – the type and amount of insulation, square footage of the area, recent utility bill, and a quote from insulation contractor.

Information sheet briefly summarizing double stud wall construction including the advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing truss wall construction including the advantages and disadvantages of this construction strategy.