Library

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Link to the most recent version of ACCA Manual D, a standard outlining industry procedure for sizing residential duct systems.

Link to the most recent version of ACCA Manual J, a standard for producing HVAC equipment sizing loads for single-family detached homes, small multi-unit structures, condominiums, townhouses, and manufactured home

Link to the most recent version of ACCA Manual S, a standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Website describing indoor air quality, and common indoor pollutants and how to reduce exposure to them.

Article describing technologies available for monitoring indoor air quality (IAQ).

Website describing archived program inforamtion for the Air Sensors International Conference, hosted by the University of California, Davis.

Website describing electric vehicles, electric vehicle charging stations, and incentives for installing electric vehicle charging stations.

Regulatory Compliance Toolbox by the American Home Furnishings Alliance (AHFA) concerning health, safety, environmental, fashion and business information related to home furnishings.

Library describing ANSI-affiliated standards.

Document describing recent discussions on indoor carbon dioxide (CO 2) levels.

This standard provides the minimum requirements for energy-efficient design of most sites and buildings, except low-rise residential buildings. It offers, in detail, the minimum energy efficiency requirements for design and construction of new sites and buildings and their systems, new portions of...

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing recommended practices for installing brick veneer that will enhance wind resistance in high wind regions and examples of proper installations and brick veneer tie spacings; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Articles describing attic and ceiling insulation, including mentions of baffles with protect insulation from wind washing.

Article describing different kinds of water-resistant backer boards.

Article describing bidirectinoal charging and energy storage methods using electric vehicles.

Document providing guidance to U.S. home builders who want to accept the challenge.

Report summarizing the guidelines for developing and reporting analytical results in a consistent and meaningful manner for all home energy uses.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Research study describing a number of promising foundation and basement insulation strategies that can meet the requirement for better thermal control in colder climates while enhancing moisture control, health, and comfort.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Document providing an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Webpage providing the latest version of the California Plumbing Code.

Webpage containing the latest version of the California Residential Code.

Webpage describing how caulking is used, how to select the appropriate caulking, and how to apply caulking.

Factsheet describing how caulking is used, how to select the appropriate caulking, and how to apply caulking.

Report describing ventilation system design, including a central fan integrated supply (CFIS) system, made up of a 6-inch outdoor air intake duct connected to the return side of the air handler with a fan cycling control to make sure the fan runs a programmed minimum amount of time.

Webpage describing electric vehicle chargers

Website describing technical expertise and support regarding electric vehicle infrastructure.

Fact sheet providing guidance and best practices on the selection of building materials used for coastal construction, and discussing flood, wind, corrosion, decay resistance, and protection recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

The Consumer Product Safety Commission (CPSC) requirement for clothing storage units (CSUs) to be tested for stability, exceed minimum stability requirements, be marked and labeled with safety information, and bear a hang tag providing performance and technical data about the stability of the CSU.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Fact sheet summarizing NFIP requirements, general guidelines, and recommendations concerning the construction and installation of decks, access stairs and elevators, swimming pools, and accessory buildings under or near coastal residential buildings; also published in FEMA P-499 “Home Builder’s...

Guide describing design recommendations to ensure that electric vehicle charging stations comply with the Americans with Disabilities Act

Fact sheet describing design and construction practices that reduce the likelihood of flood damage in the event that flood levels exceed the BFE, including illustrations of appropriate construction practices; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...

Document providing design guidance and software tool information for forced-air HVAC systems.

Webpage providing a step-by-step guide for replacing the exterior caulking on your home.

Webpage describing the benefits of installing insulation on a water heater, including descriptions of different types of tank insulation.

Webpage providing a guide for homeowners to follow when installing a water heater blanket on their electric resistance water heater.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.