Library

2012 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2012 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

Report describing practices and considerationsfor more efficient water use in pools, spas, and fountains.

Code describing energy codes for energy-conserving and compliant designs in Florida.

The purpose of this standard is to establish minimum requirements to safeguard the public health, safety and general welfare relative to the design, construction and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

2015 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Article describing different kinds of water-resistant backer boards.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing retrofitting options and methodology for architects, developers, and property owners to use when making decisions about retrofits for common building types in NY.

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

This case study describes costs associated with the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Report covering exterior energy retrofits of masonry buildings.

Document providing design guidance and software tool information for forced-air HVAC systems.

Website discusses differences between CFL and LED bulbs.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Poster describing earthquake safety tips and protection measures to take at home.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Fact sheet describing requirements and recommendations for enclosures and breakaway walls for their use below the BFE, including a diagram of a compliant wall system and examples of systems that have either resulted in increased damages or increased flood insurance premiums; also published in FEMA P...

This study evaluates the energy, humidity and indoor air quality implications of residential ventilation cooling in all US IECC climate zones.

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

ENERGY STAR website providing information about programs, products and energy efficiency information.

Website providing consumer information about ceiling fans, including specifications and buying guidance.

ENERGY STAR specifications for residential window, door and skylights, Version 6, effective January 1, 2015.

Archived 2014 EPA newsroom release describing new EnergyStar standards for clothes dryers.

Factsheet describing steps builders should take to reduce erosion and control sediment on construction sites during home construction.

Homebuilding’s simple payback estimator for an insulation upgrade – the type and amount of insulation, square footage of the area, recent utility bill, and a quote from insulation contractor.

Information sheet briefly summarizing double stud wall construction including the advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing truss wall construction including the advantages and disadvantages of this construction strategy.