Library

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Report describing approaches to using less wood in home building that minimize waste.

Fact sheet describing advanced wall framing.

Article describing recessed lighting, which if installed incorrectly may contribute to air leakage and compromise building envelope efficiency.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Article describing different kinds of water-resistant backer boards.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Fact sheet describing basement insulation considerations.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Information sheet containing images and descriptions of cantilevers.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Study investigating measured cooling energy performance in side-by-side identical homes with varying roof types, including cool roof technologies.

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Study reporting the results of comparative testing of the effect of finished and unfinished metal roofing systems on cooling energy performance in a test facility.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Document providing design guidance and software tool information for forced-air HVAC systems.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Fact sheet describing requirements and recommendations for enclosures and breakaway walls for their use below the BFE, including a diagram of a compliant wall system and examples of systems that have either resulted in increased damages or increased flood insurance premiums; also published in FEMA P...

Article from NAHB research center describing home building techniques for homes in hot climate zones.

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Report on the performance of range hood exhaust fans.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

Map of the wind-borne debris region of Florida

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Study reporting the results of comparative testing of the effect of various roof types on cooling energy performance in a test facility.

Fact sheet describing foundation design criteria, foundation types suitable for coastal environments, and addressing foundations for high-elevation coastal areas (e.g., bluff areas); also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.

Webpage from Washington State Department of Health describing how to use backup generators properly to not overload during a power outage.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Report discussing the potential energy savings of new high-efficiency downlights, and the results of product testing to date.

Brochure describing advanced framing techniques.

Brochure describing advanced framing techniques.

Information sheet about air barriers.

Brochure describing insulation and air-sealing details.

Document providing a roadmap to aid Habitat for Humanity affiliates in building high performing houses by using materials and techniques that are affordable, do not add any maintenance burden, and are volunteer friendly.

Report containing 37 fact sheets that provide technical guidance and recommendations concerning the construction of coastal residential buildings.

A guide that summarizes building materials and design considerations for increasing wildfire-resistivity of homes in areas that are prone to wildfires.

Fact sheet describing effects of planning, siting, and design decisions on coastal home costs, including initial, operating, and long-term costs; risk determination; and the effect on costs of meeting and exceeding code and NFIP design and construction requirements; also published in FEMA P-499...

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.