Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

2009 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

Report assessing the energy performance of the 2011 EVHA winners and to align the EVHA program with the BA program.

A guide about the above code residential home certification called Earth Advantage and required and optional measures available to meet the point requirements for certification.

2012 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2012 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Report describing practices and considerationsfor more efficient water use in pools, spas, and fountains.

Code describing energy codes for energy-conserving and compliant designs in Florida.

The purpose of this standard is to establish minimum requirements to safeguard the public health, safety and general welfare relative to the design, construction and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

2015 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Research study estimating potential energy savings relative to conventional ducted air distribution, and identifying equipment requirements, costs, and barriers.

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Document outlining the current and the proposed draws and estimates typical ratings changes from draw specification changes for typical systems in four cities.

Document describing three methods for elevating a home out of the flood zone.

Research study describing how envelope modifications in heating, ventilation, and air conditioning, and domestic hot water and renewable resources can result in considerable energy reductions, using the first full year of detailed data collected about a single-family home that experienced a series...

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Fact sheet describing advanced framing techniques that reduce the amount of lumber used in constructing wood-framed houses while providing more space for wall insulation.

Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

This report describes research conducted to evaluate air transfer between the garage and living space in a single-family detached home constructed to the 2009 IECC by a production home builder in Maryland.

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

Report identifying common air leakage pathways typically found in two-story townhouse developments, including recommendations for cost effectively identifying and correcting air leakage in these multifamily buildings.

Study identifying common air leakage pathways in one type of low-rise multifamily building common in mixed-humid climates.

Article describing how to stop air leaks around the windows and doors of a home.

Research report describing study of interior and exterior air sealing techniques to stop ice dams in five 1.5-story retrofit homes conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Report about two test home evaluations that provided valuable data about the true in-field performance of various building mechanical systems and LAMELs.

Report outlining workflow and results of regression models on monthly and daily utility data (meter readings of electricity consumption), outlining a process for screening and gathering useful results from inverse models.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Report assessing the accuracy of HEST as it was being developed and to provide information useful to DOE program managers and HEST development team at Lawrence Berkeley National Laboratory.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

Information sheet about reservoir claddings.

Web report explaining how correct filter sizing is an issue that applies to all new and existing homes that use ducted HVAC systems.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.

An online learning management resource for the construction community.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Information sheet with information about insulating and ventilating attics.

Report about City of Meriden Housing Authority's (MHA) collaboration with Jonathon Rose Companies to complete a gut renovation of 126 residential units in the Chamberlain Heights retrofit project.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Fact sheet describing changes made to the 2010 Florida Building Code with regards to wind design loads and requirements.

Report identifying housing characteristics and energy use for fifteen single-family housing types and specifies measure packages that provide an optimum level of energy savings based on a BEopt analysis.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.