Library

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Code set from IAPMO explaining plumbing standards. 2015 publication.

Code set from IAPMO explaining plumbing standards. 2018 publication.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Document providing guideance and considerations for duct design in an energy efficient house.

American Cleaning Institute website homepage.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Information sheet about insulating slabs.

Information sheet containing images and descriptions of cantilevers.

Carpet and Rug Institute website homepage.

Website discussing building foundation problems caused by settling soil in Colorado.

Technical report detailing a study in which actual cooling loads are compared to modeled cooling loads.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Website providing lists of WaterSense-qualified products for home plumbing and irrigation equipment that meet the requirements of the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

Report about an experimental evaluation conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

Link to all versions of ASCE/SEI 24, a standard describing the minimum requirements and expected performance for the siting and design and construction of buildings and structures in flood hazard areas that are subject to building code requirements.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Presentation about proper installation of flexible ducts.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Fact sheet defining “lowest floor,” identifying common construction practices that are violations of NFIP regulations, and discussing benefits of exceeding the NFIP minimum building elevation requirements; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Glossary of terms used by the National Flood Insurance Program

Report about an experimental evaluation has been conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

Report describing the experimentally evaluated potential of a novel residential night cooling concept.

Information sheet including a checklist of steps to follow for pouring concrete.

Webpage containing downloadable fact sheets covering carpet-related topics including Indoor Air Quality, Asthma and Allergy, Cleaning Products, and Environmental Sustainability.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

Web page describing the basics of how to size and build a battery bank for electricity storage.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

EPA WaterSense guidance on urinals.

Users guide to help contractors and homeowners use the Cold Climate Heat Pump Sizing Support Tools developed by NEEP to size and select the best air source heat pumps for their cold climate location.

ENERGY STAR overview on certified ventilation fans.

Resource that provides a directory of individuals that have successfully completed all requirements of at least one WaterSense Approved Certification Method (WACM) through a Home Certification Organization (HCO).

Website providing a searchable list of products that meet the EPA WaterSense criteria for water savings.

Specification of criteria for lavatory faucets and faucet accessories under the U.S. EPA WaterSense Program.

Webpage from U.S. Environmental Protection Agency describing the EPA WaterSense program including the Mandatory Checklist for WaterSense Labeled Homes, information on how to get certified, and information on finding or becoming a WaterSense Home Certifying Organization.

Web page providing links or specifications for homes to be labeled through the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Webpage describing the home certification organization, 24/7 Certifications and their requirements for whole house water management in a checklist format.

Fact sheet describing the home certification program CHEERS and its requirements for whole house water management in a checklist format.