Library

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

Information sheet about sealing combustion appliances to ensure good indoor air quality.

Expert meeting focusing on identifying gaps and barriers in combustion safety that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy...

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

Report outlining the issues with using existing ducts with a new low-load HVAC system, which reduces throw at supply registers causing decreased mixing of supply and room air, leading to potential thermal comfort complaints.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Article explaining installing cavity insulation.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Guideline describing the importance of the different types of multifamily building attics and their unique challenges, and outlines strategies and materials used in air-sealing them.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Guideline describing information and specifications relevant to air-seal existing attics.

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.