Library

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Document describing the air leakage provisions of Appendix RA of the 2015 IECC (prepared for the State of Georgia to assist with compliance with their 2019 Energy Code).

2015 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

Guide providing engineering seismic design and building practices based on post-earthquake research.

A colored map showing seismic zones across the United States, ranging from lowest to highest seismic hazards.

Document presenting the minimum recommended requirements necessary for the design and construction of new buildings and other structures to resist earthquake ground motions throughout the United States.

Document containing a series of resource papers that describe earthquake design components, including shear walls, resiliency, ground motion, and story drift and deflection, among others.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

A brochure educating homeowners on how to protect their home during seismic events.

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard outlining materials and installation methods by using commercial building wraps.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard outlining materials and installation methods for a liquid-applied vapor permeable air barrier systems located in the non-accessible part of the wall.

Energy Star web page providing guidance on attic ventilation.

Vinyl siding estimating and installation guide for vinyl siding products.

Report (1) compares existing measurement methods, based on field testing in a wide range of buildings, (2) presents the development of two new methods to directly measure exterior and interior leakage of an attached unit, and compares to existing methods; and (3) experimentally evaluates the...

Report examining the effectiveness of an aerosolized acrylic technique for air sealing existing homes to reduce air leakage and improve energy efficiency.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Fact sheet describing an innovative aerosol-based sealing technique for tightening building envelopes in new homes, involving pressurizing the structure and dispersing an aerosol sealant "fog" to autonomously identify and seal leaks, with real-time feedback through a standard blower door and laptop...

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Brochure about creating an air barrier by sealing drywall assemblies.

Brochure about creating an air barrier at tub, shower and fireplace walls.

Information on the control of air flow across building enclosures to control moisture damage, reduce energy losses, and ensure occupant comfort and health. A continuous, strong, stiff, durable and air impermeable air barrier system is required between the exterior and conditioned space to control...

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Article describing how to stop air leaks around the windows and doors of a home.

Manual describing best practices or home construction in Alaska and northern climates.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Report providing information regarding the benefits and challenges associated with the installation of earthquake-actuated automatic shut-off valves (ASVs) or remote-control valves (RCVs) to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Safety brochure from the Consumer Product Safety Commission (CPSC) describing the dangers to children of furniture tipping over if it is not securely anchored.

Website providing consumers with information about the risk to children from appliances and furniture tipping over and ways to anchor furniture and appliances to prevent this hazard.

Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.

Article describing air sealing and air barriers in buildings.

Web-based mapping tool offering a fast, reliable way to look up key design parameters specified in Standard ASCE 7-10, 7-16, or 7-22 for a specific address or location which is free to use and can look up data for eight different environmental hazard types: wind, tornado, seismic, ice, rain, flood...

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

A basic guide walking through the various types of valves useful in mitigating the effects of earthquakes and other seismic events on natural gas pipelines for residential use.

ASTM standard providing test methods for determining duct air leakage in low-rise residential and commercial buildings.

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

NREL webpage of standard work specification of exterior and interior, attic floors, attic knee walls, and unique installations.

Technical article describing issues and moisture concerns related to weatherization efforts.

Article describing the building science implications of insulating vented or unvented attics.

Article describing the research into insulating vented versus unvented attics.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Fact sheet describing research sponsored by DOE's Building America program to research the importance of attic air-sealing and best practice attic air-sealing techniques for new and existing homes.

Guide describing methodologies for assessing and mitigating thermal bridging in building envelopes, featuring detailed performance data, interface solutions, and assembly-specific strategies for energy-efficient construction.