Library

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Document describing the air leakage provisions of Appendix RA of the 2015 IECC (prepared for the State of Georgia to assist with compliance with their 2019 Energy Code).

2015 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Web article showing examples of various architectural methods for shading windows.

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard outlining materials and installation methods by using commercial building wraps.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard outlining materials and installation methods for a liquid-applied vapor permeable air barrier systems located in the non-accessible part of the wall.

Vinyl siding estimating and installation guide for vinyl siding products.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Article describing how to detail head flashing above a window.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Report (1) compares existing measurement methods, based on field testing in a wide range of buildings, (2) presents the development of two new methods to directly measure exterior and interior leakage of an attached unit, and compares to existing methods; and (3) experimentally evaluates the...

Report examining the effectiveness of an aerosolized acrylic technique for air sealing existing homes to reduce air leakage and improve energy efficiency.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Fact sheet describing an innovative aerosol-based sealing technique for tightening building envelopes in new homes, involving pressurizing the structure and dispersing an aerosol sealant "fog" to autonomously identify and seal leaks, with real-time feedback through a standard blower door and laptop...

Brochure about creating an air barrier by sealing drywall assemblies.

Brochure about creating an air barrier at tub, shower and fireplace walls.

Information on the control of air flow across building enclosures to control moisture damage, reduce energy losses, and ensure occupant comfort and health. A continuous, strong, stiff, durable and air impermeable air barrier system is required between the exterior and conditioned space to control...

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Article describing how to stop air leaks around the windows and doors of a home.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Article describing air sealing and air barriers in buildings.

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

ASTM standard providing test methods for determining duct air leakage in low-rise residential and commercial buildings.

Information sheet from FEMA on preparation for extreme heat, including measures for keeping homes cool.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Brochure about air sealing windows.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Guide describing methodologies for assessing and mitigating thermal bridging in building envelopes, featuring detailed performance data, interface solutions, and assembly-specific strategies for energy-efficient construction.

Report recording the results of a field study conducted in a single historic home in Seattle, Washington, to document the performance of Indow Windows' interior storm window inserts.

Webpage providing information on how window shading can reduce heat gain in summer and heat loss in winter.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Document about condensation between the panes, on the inside surface of the outer glass of double pane windows.

Report outlining how conditioned crawlspaces perform better than vented crawlspaces in terms of safety, health, comfort, durability and energy consumption.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

Research study evaluating energy savings and cost effectiveness of installing low-emissivity (low-e) storm windows over existing windows in residential homes in all climate zones.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.