Library

Document describing the air leakage provisions of Appendix RA of the 2015 IECC (prepared for the State of Georgia to assist with compliance with their 2019 Energy Code).

Federal statistics about national energy consumption in residential homes.

Federal statistics about national energy consumption in residential homes in 2020

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard outlining materials and installation methods by using commercial building wraps.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard outlining materials and installation methods for a liquid-applied vapor permeable air barrier systems located in the non-accessible part of the wall.

Vinyl siding estimating and installation guide for vinyl siding products.

Website article comparing DC and AC batteries and explaining that DC batteries have black start ability to restart from solar power while providing AC batteries need grid power to restart if fully discharged.

Website article describing pros and cons of DC and AC batteries and explaining that AC batteries are less expensive than DC batteries.

Website article describing the advantages and disadvantages of AC and DC battery energy storage systems and inverters for solar power systems.

A website explaining the process of sealing a home with Aeroseal & how the technology is used to seal holes in the air ducts and vents of the home.

Report examining the effectiveness of an aerosolized acrylic technique for air sealing existing homes to reduce air leakage and improve energy efficiency.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Fact sheet describing an innovative aerosol-based sealing technique for tightening building envelopes in new homes, involving pressurizing the structure and dispersing an aerosol sealant "fog" to autonomously identify and seal leaks, with real-time feedback through a standard blower door and laptop...

Brochure about creating an air barrier by sealing drywall assemblies.

Brochure about creating an air barrier at tub, shower and fireplace walls.

Information on the control of air flow across building enclosures to control moisture damage, reduce energy losses, and ensure occupant comfort and health. A continuous, strong, stiff, durable and air impermeable air barrier system is required between the exterior and conditioned space to control...

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Article describing how to stop air leaks around the windows and doors of a home.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Website describing electric vehicles, electric vehicle charging stations, and incentives for installing electric vehicle charging stations.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Article describing air sealing and air barriers in buildings.

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

ASTM standard providing test methods for determining duct air leakage in low-rise residential and commercial buildings.

Website providing comparison charts and reviews of battery energy storage systems for solar power systems.

Fact sheet providing information on building-scale and utility-scale battery storage for disaster resistance.

Article describing bidirectinoal charging and energy storage methods using electric vehicles.

Report describing detailed information on costs associated with the installation of electric vehicle chargers.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Guide describing methodologies for assessing and mitigating thermal bridging in building envelopes, featuring detailed performance data, interface solutions, and assembly-specific strategies for energy-efficient construction.

Webpage describing electric vehicle chargers

A simple three-step guide for homeowners who are looking to replace existing light bulbs with more energy-efficient, higher-performing bulbs.

Website describing technical expertise and support regarding electric vehicle infrastructure.

Report outlining how conditioned crawlspaces perform better than vented crawlspaces in terms of safety, health, comfort, durability and energy consumption.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Report exploring alternative methods to find long-term solutions to energy loss in 1 ½-story homes to save energy, improve comfort, prevent frost buildup on the underside of the roof deck, and reduce the risk of ice dam formation/reformation.

Report describing costs associated with non-residential electric vehicle charging, including multifamily properties.

Guide describing design recommendations to ensure that electric vehicle charging stations comply with the Americans with Disabilities Act

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

Report describing guidance for selecting an electric vehicle charger

Report describing market trends for electric vehicles and summarizing energy codes and standards in the United States related to electric vehicles.

Document describing information on levels of electric vehicle charging.

Report describing best practices for installing electric vehicle chargers.