Library

Report describing the results of a 21-home field study investigating the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Report describing ways to retrofit a home to make it more hurricane resistant.

Article showing steps for kick out flashing at roof-wall intersection.

Report describing research conducted to support California’s Title 24, Part 6 Building Energy Efficiency Standards by analyzing the impact of installation location and ventilation on heat pump water heater (HPWH) performance, emphasizing the need for proper installation to maximize efficiency...

Article describing a technique for installing a skylight and avoiding potential water leaks with the use of a peel-and-stick (or self-adhesive) membrane under the flashing.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Fact sheet describing important roof-to-wall and wall-to-foundation connection details for masonry construction in coastal areas, including load paths, building materials, and reinforcement; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Repor ourlining testing results from a 53 home monitored sample, long-term energy use of electric resistance clothes dryers.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

An installation training manual discussing the installation of metal roofing materials and related accessories, for both new construction and retrofit projects.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

Report describing an analysis method for determining optimal residential energy efficiency retrofit packages and applies the analysis method to a 1960s-era home in eight U.S. cities.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Report covering the selection of roof vents for rainwater resistance.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

Guide providing information on controlling attic ductwork sweating.

A document providing guidance on integrating a PV array with a roof system.

Document about development of a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Study examining how design features, such as building envelope openings and compartmentalization, affect the wind pressure in typical low-rise buildings with gable and hip roofs.

Report covering wind loading on roofing assemblies.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Paper examining the monitored performance of four newly constructed near zero energy homes in Florida.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Website providing guidance on how to reduce the risk of damage to a home from hail.

Webpage providing guidance for homeowners on how much snow weight a typical roof can handle and when to consider removing snow from the roof.

Article describing how ice dams form on residential roofs, how they damage homes, and solutions to prevent future dams.

Fact sheet from Wisconsin Focus on Energy explaining how to prevent future ice dams on homes by learning about their formation and mitigation of contributing factors.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

List of recommendations from IBHS on how to protect homes from ice dam formation.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Website providing an online calculator for determining energy and cost savings from installing radiant barriers in attics.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

U.S. Department of Energy's website describing radiant barriers in homes.

Website with answers to some of the most commonly asked questions about attic radiant barriers.

Report covering the performance of residential buildings during three hurricanes impacting Florida in 2004.

Information sheet with the definition and uses for a raised truss.